you get ecu id there is ecu number and soft number
and find original make mod file and writen
if not soldering job
you get ecu id there is ecu number and soft number
and find original make mod file and writen
if not soldering job
but what tool?its not on the list.i have galletto2,magpro,mpps...
MPPS can do the job.
on mpps list there is m5.92 i was try and shows ecu id but no read,06A906018CJ but no soft no.
yes its china clone v12,working good no problem.but its maybe a bug?
M3.83 only solder
on some a3 pin43 is not connected to obd that's why you get only ecu number ... connect pin 43 to 12v and try again
mpps only ID and write on these ecu's and works flawless
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
For bench flash:
This ecu can have flash memory or eprom plcc44.
If you have plcc44 27c1024 you can read/write only with external programmer.
MPPS can do write as motronic 5xx
BusCan (26th September, 2020)
Exactly like OEM said there is 27c1024 in big plcc44 socket.
MPPS cannot do this ecu! becouse it's reading only.
Bookmarks