i need ford focus 1.6tdci dpf off

**fcan** · 12th December, 2012, 02:45 PM

8M51-12A650-XE 0281015242 THANKSS...

**assitutto** · 12th December, 2012, 03:47 PM

your file off

**fcan** · 12th December, 2012, 04:23 PM

thanks my friend but don't work

**J_amb_o** · 12th December, 2012, 11:16 PM

Off by switch on this.

**flyins** · 13th December, 2012, 12:03 AM

If you flash with mpps via obd be careful as can corrupt eprom, i did one last week and then needed to ids cal file

**assitutto** · 13th December, 2012, 08:28 AM

Originally Posted by J_amb_o

Off by switch on this.

i made dpf off by switch
and this solution in 100% tested

**sepistar** · 13th December, 2012, 08:35 AM

Originally Posted by flyins

If you flash with mpps via obd be careful as can corrupt eprom, i did one last week and then needed to ids cal file

i have to do one today,as i want to write with mmps,will know what exactly is happen?you lost the injectors coding or something?
regards

**flyins** · 13th December, 2012, 07:39 PM

Hi friend no didnt lose injector coding,(even though that can happen), it lost variant coding fault code "P1187 variant coding", i had wrote different remap to this car successfully three times with mpps, but a week later i wrote a file back to car and then i had engine malfunction, car still started but about every three to four starts of the car i got engine malfunction on lcd on dash with a bleep and bad acceleration. No mil light lit up though. When scanned got p1187, so then it needed to have calibration using ids. You must use genuine ids or GOOD clone to do this and the right calibration file for the ecu. Search on here for P1187 and you will see this has happened quite often. And yes i had good voltage to car battery using external voltage to battery.
Re wrote using FG galletto with dpf off file after calibration which wrote good