help to read nec mcu into berlingo bsi

[autotechnique]

hello best freinds i have a bsi from citroen berlingo model 2001
and i like to read the nec mcu into it i try it with upa but i can't
if someone can help me please.

[baze007]

Try this conectins

[gjuzel]

Try this conectins

for bsi berlingo ..good tool.low cost

[baze007]

for bsi berlingo ..good tool.low cost

dont work on this dash 2001....only new model

Operated models:
1. Peugeot 207
2. Peugeot 307 from 2005- ...
3. Peugeot 308
4. Peugeot 407
5. Peugeot 607 from 2006-...
6. Peugeot 807 from 2006-...
7. Peugeot Partner III
8. Peugeot C8 from 2006-...
9. Citroen C2
10. Citroen C3 II
11. Citroen C4
12. Citroen C4 Picasso
13. Citroen C5 II
14. Citroen C6
15. Citroen Berlingo III
16. Lancia Phedra from 2006-..
17. Fiat Ulysse from 2006-

[gjuzel]

dont work on this dash 2001....only new model

Operated models:
1. Peugeot 207
2. Peugeot 307 from 2005- ...
3. Peugeot 308
4. Peugeot 407
5. Peugeot 607 from 2006-...
6. Peugeot 807 from 2006-...
7. Peugeot Partner III
8. Peugeot C8 from 2006-...
9. Citroen C2
10. Citroen C3 II
11. Citroen C4
12. Citroen C4 Picasso
13. Citroen C5 II
14. Citroen C6
15. Citroen Berlingo III
16. Lancia Phedra from 2006-..
17. Fiat Ulysse from 2006-

....
Perhaps this tool to be done!!!????

[batandball]

for bsi berlingo ..good tool.low cost

Where do you get this OBD tool from and does it do wot it says on the label or should I say packet

[newgeniehex]

hello best freinds i have a bsi from citroen berlingo model 2001
and i like to read the nec mcu into it i try it with upa but i can't
if someone can help me please.

HELLO
use only this connection for upa only
diga dp3 enigma and nec programmer use another pin 11
be carrefull for connect pin 1 to 8 and 12
this picture work perfect!!
the tool for change the mileage via obd work only via can bus and the best is psa by smok!!work very quicly
use this link for buy the psa tool
and new update is available:: bsi continental!!!
http://diagcar.pl/STR_EN/xml/pdf/PSA_EN.pdf
Car Electronics


the xtorse is big sheet

[autotechnique]

my freinds into the bsi it have NEC 780949 (100 pin) mcu please help me to read it with upa

[vageric]

my freinds into the bsi it have NEC 780949 (100 pin) mcu please help me to read it with upa

see post #7

[germanml]

Are you using Nec adapter for UPA?? I have read it with it several times

[VTS_Tibi]

I tried to read this MCU with UPA.

Connected all wires, tried to connect as NYO4 suggests - pin 9 connection error

Tried to connect them how UPA suggests - pin 9 connection error

Tried every different options I found on DK - pin 9 connection error

What could be the problem here?

[ELAB014]

Hi mates,
I made same as post 7.
The UPA gives me baudrate capture error
Does someone know what?s going on???

THX

[Mario3]

Hi mates,
I made same as post 7.
The UPA gives me baudrate capture error
Does someone know what?s going on???

THX

your adapter is probably not working, here you have a tutorial how to repair the upa adapter for nec.


if i helped thanks is below

regards

[claudio35]

your adapter is probably not working, here you have a tutorial how to repair the upa adapter for nec.


if i helped thanks is below

regards

No working for me. I have one yellow clone

http://www.digital-kaos.co.uk/forums...ut-nec-456726/

[Digamax]

Hi, I use Etl Nec programmer + micro hooks for all nec procesor. For Berlingo bsi, 5 min job.

Best regarde
Vladimir