bmw 530d dpf problem

[dagi]

Hi guys,I have problem with my car.I try switched dpf off with ecusafe and manual switch with 3 value off.I have no errors or regeneration but after removing dpf car feel very slow after 3000 rpm .This is my ori file can someone help me.Thanks in advance

[yas200]

Hi guys,I have problem with my car.I try switched dpf off with ecusafe and manual switch with 3 value off.I have no errors or regeneration but after removing dpf car feel very slow after 3000 rpm .This is my ori file can someone help me.Thanks in advance

Need remove manualy regeneration and dtc
4605 4606 4607 4608

4030 4031 4032 4033
452A 452B 452C 452D

4010 4011 4012 4013
4020 4021 4022 4023
4165 4166 4167 4168
4CE0 4CE1 4CE2 4CE3
480A 480B 480C 480D
481A 481B 481C 481D
4CF0 4CF1 4CF2 4CF3
41BA 41BB 41BC 41BD
4D00 4D01 4D02 4D03
4625 4626 4627 4628
4D10 4D11 4D12 4D13
4D20 4D21 4D22 4D23
4D40 4D41 4D42 4D43
4175 4176 4177 4178
4D70 4D71 4D72 4D73
4185 4186 4187 4188
457A 457B 457C 457D
458A 458B 458C 458D
459A 459B 459C 459D
45AA 45AB 45AC 45AD
4665 4666 4667 4668
: Goodpost:

[dagi]

Thanks for help how can find this adresses i try with 16 bit and 8 bit but can't find them.After i make 001 0257 001 to zero i don't have regeneration but the car still cut fuel after 2800rpm.

[autotuner1985]

with correct dpf off switch no limp mode (only errors related on dpf, but you should erase it selectivity - i can do it correctly)

[smayer]

with correct dpf off switch no limp mode (only errors related on dpf, but you should erase it selectivity - i can do it correctly)

You can do it correctly, have the original file, what you are whaithing for?? money?

[yas200]

with correct dpf off switch no limp mode (only errors related on dpf, but you should erase it selectivity - i can do it correctly)

all can correctly do - on all diesel cars. ) ) )

[camil]

Try this one and report

[hollow]

can you pm me password also
have same ecu ,remapped and dpf off , but dpf fault registering as pressure sensor fault , new sensor is no different still fault and car uses lot of fuel and smoke bad on acceleration.

[smayer]

can you pm me password also
have same ecu ,remapped and dpf off , but dpf fault registering as pressure sensor fault , new sensor is no different still fault and car uses lot of fuel and smoke bad on acceleration.

You have same ECU but maybe not same software, if you need help the right way is post your original file and not ask for pass.

[hollow]

yes you are correct just thought it would save time to ask for pass .

cannot upload my file till monday at earliest as hardware is at work to dump file from car .