kess v2 clone

[mauronow]

obd2 seems q works well ...!
tricore mode work ? anyone know?

[djbiugi]

Tricore toolboot (or kess) must be fix to work on desk with antituning

[OVERSPEED]

What should be fixed ? (I mean, what to change ?)

[djbiugi]

The problem is that can't use bootmode on tricore edc17..only this for the moment...by obd is ok..see the video that i do

https://www.dropbox.com/s/b7c7yczv0lqem9t/video.avi

[djbiugi]

This is the page with fix....my interface had already the 100kohm resistor...but not work too

kessv2 checksum error | CarSets.co.uk Official Blog

[djbiugi]

This evening use tester to test pin and all cables supplied in package...the little box with switch On Off to do Ecu on desk for me is half wrong!! Four colour converge to +12v pin

I'm sorry, I said bullshit about....see doc 14P600KCK4.mht

Red	Power (+12V)
Orange	Power (+12V)
Yellow	Power (+12V)
White	Power (+12V)
Blue	Power (+12V)
Gray	GND
Brack	GND
Green	K-Line

[aslamaslam]

hi:
i bought kess v2 clone i dont connect it to internet when i open k tag list it didint work it need activatin and when i press info this picture appaers i want to know is it blocked or not and why it dosenot work the k tag or bootload
this picture appaers i want to know is it blocked or not and why it dosenot work kess%20v2.JPG

[aslamaslam]

hi:
i bought kess v2 clone i dont connect it to internet when i open k tag list it didint work it need activatin and when i press info this picture appaers i want to know is it blocked or not and why it dosenot work the k tag or bootload
this picture appaers i want to know is it blocked or not and why it dosenot work kess%20v2.JPG

[bondiblu]

I see the software is 1.94 (latest version)!

[aslamaslam]

i bought kess v2 clone i dont connect it to internet when i open k tag list it didint work it need activatin and when i press info this picture appaers i want to know is it blocked or not and why it dosenot work the k tag or bootload
this picture appaers [/COLOR]i want to know is it blocked or not and why it dosenot work kess%20v2.JPG

[aslamaslam]

the softwar is 1.89 no 1.94

[bondiblu]

the softwar is 1.89 no 1.94

I was just saying what I see in the picture you supplied, it says 1.94.

Also KTAG and Kess are 2 different tools. If I connect my KTAG then I use KTAG software not Kess.

[djbiugi]

I've try too with EDC17C18 on boot...always same error how the EDC17 bmw

[atomiczen]

bmw 320d 136hp with edc15m read ok

[atomiczen]

we can see perhaps software was modified same number of log asked ..or it's normal... atomiczen please take a look on your official.Thx

read only today, i'll check tomorrow