Hello!
In the meanwhile I've got all my 2 examiners running. Connection possible to the ECU's of some cars. I had the same issue with connection problems with the VCI / CAN Card and found another card on the internet, bought it and the connection ist possible with the "new VCI / CAN Card"
IT HAS NOTHING TO DO WITH THE FLASH CDs - The Flash CDs are only for Updating a cars ECU!!!
The eeprom on the VCI Card is flashed at first bootup after installation of a new version!!! (Of course this can only be done if the BIOS Settings are correct AND the CMOS Batt. issue is solved - SEE ABOVE!)
The latest version for the first VCI Card (with only one 15pin connector for the 3-pin "fiat plug") is the Rel. 4.10!
I have one faulty VCI / CAN board which is sending a signal out to the ECU of a car (I'm sure about that because on a '97 Gtv the key symbol at the dash lights up at a connection with the ecu), but doesn't get a connection. So I think this faulty board sends something but isn't able to receive anything.
Is anybody around here who had a similar problem and got it solved already?
For any CDs or Floppys it is better to copy them direct from CD to CD or Floppy to Floppy without image. I had several problems with images. If you need a copy please send me a PM.
Regards. Fochista.
Bookmarks