Hi
Today i have remove the epoxy on sd card in my ktag
But i cant remove it tomorow i check if there is not epoxy under the sd card support
If its good i can read sd card in few days
I repport when its done for post the dump
Bye
euroscan (10th May, 2013)
Hi
Today i have remove the sd card not readable on windows because its raw drive
So i take utility softwrae to make image of this raw drive
RAWDISKCOPY free
Image size 46 Mb
I start my ktag with 1.93 software but without sd card for look the difference
I see in info that the ktag info are same like the blocked ktag
I re-put the sd card and re open with 1.89 software and i see my ktag is blocked
Conclusion:
Its not on SDCARD
because i rewrite original image on sd card
Same problem i have to buy a new ktag
Maybe ftdi eeprom or upc or usb patch
Thks
i forget does someone with ktag can send the dump of his ftdi eeprom
I test with mprog 3.5 he can read the eeprom
This is my eeprom ftdi
counter lock inside in mcu
KESS 5.028/5.030 VR - KTAG 8.000 EU PCB
PCMFlash 1.2.0 dongle EU
STool/MTool v1.49 EU
ECU Flasher activation
Does there is patch for rewrite good file?
Like galetto 2 clone
Thks for help
Hi mates! , ktag clone works fine with PSA bosch 7.4.4
I look that chone clone have many cables,can i ask is there any labels in that cables to know witch cable for what have to use it?
The software tells you the connections when you select the vehicle you are working on
update to v1.93
https://rs961p2.rapidshare.com/files...?directstart=1
autoparty1978 (9th June, 2014)
niwat_spp link doest work : Download permission denied by uploader. (0b67c2f5)
Did you test on your ktag clone? Working 100%?
The link is dead, have you tried to update your ktag clon?
Please new link ...
Do not forget to THANKS !
--------------------------------------------------
SWIFTECH FULL
ECM Titanium FULL
KESS V3
AUTOTUNERS
B-FLASH
WINOLS
TOPDONE
AUTEL
FILE SERVISE .. web under construction
Bookmarks