Error With Das/Xentry

[Toutancamon]

Hi, Can you help me, I can not connect my multiplexer with DAS / Xentry, he displays the following error

[AdnanB]

Run Caesar test in star utilities.

[miha99]

First check COM port setup:
Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right click on that COM port you have left enabled and and select Properties.
Go to Port Settings tab and set these values:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control : None
Then click on Advanced... button and make sure Use FIFO buffers are checked and COM Port Number is set to COM2.

[Toutancamon]

Hi, I checked the config settings COM2 everything is normal, please you do not have any other ideas?

[Toutancamon]

With Caesar test in star utilities I get the following message, I'll put it in ais image capture. I use the STAR C3 Mercedes

[Toutancamon]

Please help me

[cocoh]

With Caesar test in star utilities I get the following message, I'll put it in ais image capture. I use the STAR C3 Mercedes

Hi..
Bad configuration.. first check cal.ini