Might be worth introducing a another code to the system
( unplug a sensor of some sort ) just to see the results
most codes will clear automatically after so many key-starts
you will find a list of pids in attachment
Might be worth introducing a another code to the system
( unplug a sensor of some sort ) just to see the results
most codes will clear automatically after so many key-starts
you will find a list of pids in attachment
stupi (15th October, 2023)
You mean sending a code like A2 or A3 ? Ax ? ... I guess to use those pids you attached the adapter must be modified right? Attaching another pin to pin 7.
I was able to clear the p0121 by doing this: ingition on/off -> ignition on for 30 seconds then engine start.
I also found out that the program maxiecu (http://maxiecu.com.pl/download,6,en.html) works with elm327 and with the car, it's sending the same pids I found with vci. I tested the demo version.
hi chriz are you sure maxiecu demo version works with elm327 ?
because i tested it and dont work
there are a lot of free programs around, just bear in mind that most will
only give you basic obd2 ( emission related data )
How to use ELM327 to communicate on K-Line (ex. ISO 14230-4)?
Would it be possible to use an ELM327 instead of a VAG/KKL?
Bookmarks