2011 Jaguar XF Smart key programing-ALL keys Lost

**crashcar** · 26th March, 2013, 11:36 PM

Hello.Please ,can anybody guide me thru programming smart keys for 2011 Jaguar XF.Using JLR.Can't figure out.Any inputs highly appreciated.

**kevfield** · 27th March, 2013, 12:03 AM

Open SDD JLR connect to car select Diagnostic , then Selected Symptoms select on tree select Body + Security and locking + Anti-theft immobilization system + Passive anti-theft system lamp then high light inopertive , flashers , flashers with ignition on and constantly then hit continue it will then load up recommended canididates! Then the top tabs select Service Functions in that tab you will find Security-Key programming hit run and your off to programming new key.......

Hope this helped

Thanks kev

**Dashcoder** · 27th March, 2013, 12:48 AM

Hi

this tool can program your key even if all keys are lost .

Best Regards

Originally Posted by kevfield

Open SDD JLR connect to car select Diagnostic , then Selected Symptoms select on tree select Body + Security and locking + Anti-theft immobilization system + Passive anti-theft system lamp then high light inopertive , flashers , flashers with ignition on and constantly then hit continue it will then load up recommended canididates! Then the top tabs select Service Functions in that tab you will find Security-Key programming hit run and your off to programming new key.......

Hope this helped

Thanks kev

JLR_v10.pdf

**gwee** · 27th March, 2013, 06:36 AM

Originally Posted by kevfield

Open SDD JLR connect to car select Diagnostic , then Selected Symptoms select on tree select Body + Security and locking + Anti-theft immobilization system + Passive anti-theft system lamp then high light inopertive , flashers , flashers with ignition on and constantly then hit continue it will then load up recommended canididates! Then the top tabs select Service Functions in that tab you will find Security-Key programming hit run and your off to programming new key.......

Hope this helped

Thanks kev

Hi Kev,

Thanks for the good info.

**Adamon777** · 3rd October, 2018, 01:40 AM

HI!
I have official SDD and try to programming (all key lost) new key like your instruction, but car request ignition ON, how use SDD when all key lost?

**robarco** · 25th December, 2019, 05:52 AM

The same.
Im use option add key in SDD v 158

And as a result, I now have a problem with IMMO.
Shows me
PID C124: bytes 1-4; bit 3=0
Run "Immobilisation fron security menu etc....
after executing the command:
I can lock and unlock car Thats all.......
Information on dash "Sterring Column Lock " (Column is not locked)

No chance to start ignition ??

Any tip how to fix this