C4 DAS Clone Problem

[greg38]

I have test W210 with HHT and all work perfectly.

DAS say me,it can't connect to car (tested on ML 163) ......

My Fault: (1.2)-2.503.9909

Can i fixed it with Cal872?



This is not a error:

Fault (1.17)-7.870


cal870




Ceasars test:

Selfdiagnostic
==============
Device: Part D
Toolkit-Resultcode: 1
SDconnect Toolkit - device diagnostic - Part D
==============================================
CAESAR STOS+ Rev.:2.12 from Jun 16 2005
generated protocol file from 29.12.2010 13:47
SystemCheck :
Check serial ... 0 Ok
CAESAR HW Detection :
D2Access ... 0 Ok
D2DownLoad ... 0 Ok
CAESAR Part D2 detected on COM2 with baudrate: 19200
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 029866
Authorization Level 4
Part D
Hardware Authentification 011205
Hardware Date 031205
Special EEPROM check :
D2 Special EEPROM check:
Inst. date registered ... 0 Ok
D2 Special CAN Test :
Special Test ... 0 Ok
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 029866
Authorization Level 4
Part D
Hardware Authentification 011205
Hardware Date 031205
Slave check :
D2 Slave check
D2 Processor ... 0 Ok C165 (mask step CA) is mounted.
D2 RAM ... 0 Ok
D2 FLASH ... 0 Ok
D2 EEPROM ... 0 Ok
D2 SERCTL1 ... 0 Ok
D2 UART1/2 ... 0 Ok
D2 ADC ... 0 Ok
D2 Display Power Supply :
D2 Power Battery ... Voltage KL30 = 12.6 V
D2 Power Ignition ... Voltage KL15 = 12.1 V
D2 Voltage K-Lines :
D2 State K-Lines (35) ... Total 6 (+), 29 (-)

Thanks for help!!!!

Regards

[mercis]

multiplexer blacklisted
you can all medicin on DKFORUM find

[greg38]

Thanks!!!

With cal872 i have fixed the problem...

[xhackers]

what did you have to do to fix this problem?

[diagnoza_auto2000]

You have to put a fix m8.
Search the forum and you will find!

[BimmerGT1]

Here is the fix try it, good luck

[osamaa]

thnk you for helping others