Hello, this connection could help thanks.
Hello, this connection could help thanks.
Attachment 192131Work 100%
guillermoc (12th April, 2013)
Thanks, these two models are similar and one of them was missing, thank you very much Pezao.
No mileage reading, I use "Programmer 9S12X 1.54" Same should I change the crystal?![]()
with upa no need change cristal
Gol MC9S12HZ256 CAL (3L 16Y).JPG
GOL 2011/12, Using "Programmer 9S12X 1.54" set up reading, but does not work as a fox
Last edited by guillermoc; 12th April, 2013 at 04:53 AM.
friend that work 100% if no read please change your programmer to read USE UPA-USB
yugo45 (13th April, 2013)
Unfortunately my friends "9S12X Programmer V 1.54" does not read this dashboard, but if you read the same but with a different micro pin Connection location (near the micro, not down like this), not to have happened, you can tell me?
The data of "VW_BRASIL_Gol-G5_Saveiro-G5_Voyage-G5_2011_MagMar_MCU_MC9S12HZ256CAL_3L16Y_v2" is not equal to that of the "GOL" but has the same micro?
I attach file with 0 km. I always do this way and adopt new Km with VCDS.
If you have VCDS you can add how much you want :
- [Select]
[17 - Instruments]
- [Login - 11]
Enter a value of 13861
[Do It!]
- [Adaptation - 10]
Enter "channel number" 09 to select channel
Put in NEW Value the number of km divided by 10. Example: If old cluster had 50,357 km, put in 5036.
[Test]
Observe the Instrument Cluster and make sure the km displayed is correct.
[Save]
If you do not have tell me how much Km you want?
Thank you on very kind worlds for this little girl. Thank GOD donation help a lot and money for deposit for surgery is there.
She is already in Houston and in few days we will see what will happen.
I hope and pray she will go OK through surgery and she will be healthy and alive.
Thanks.
Last edited by yugo45; 13th April, 2013 at 05:02 AM.
guillermoc (13th April, 2013)
Bookmarks