Originally Posted by
boxsport
Hello guys,
So, i was able to read the CEM data (Thanks to Holtek for info on programmer and all the Support) and program / add 2 new transponder keys with CarProg.
I had a problem with CEM making a constant sound like a relay working, but it seems to be related to the "Write" process. I programed again CEM and its all ok.
But after connection to the car, i have no communication in OBD2 with none of the Car Modules... (ECU/TCM/CEM, ABS, etc...)
Does anyone know what could be the issue?
We tried to turn on the car, and it gives signal, but car has no spark. Fuel pump seems to be working because in Injectors Rail, we have gasoline "coming out" (if we open "valve")
Also, there is nothing in the Dash showing and all the door, windows, sunroof controls dot work...
Only thing that works is AC and Stereo...
Does anyone have any idea what could this be?
Can this be CEM related?
I was able to get a used CEM but they are different part numbers... Can i just program New CEM with the bin y prepared with the transponders and check it out?
If anyone has any ideas, i would appreciate...
Thanks
Bookmarks