DASBOARD SCENIC II DISPLAY RADIO PROBLEM

[auto421]

good friends, I have a problem in a scenic dash, I replace the original dash version 5.0 with another dash version 8.0 . i have programmed the EPROM and wil work fine but rode in the car and display smaller display of the hours and where temperature and radio works but does not show the data radio. the quadrant will be not compatible with the radio? someone help me?

thank you, best regards

[jarecki55]

You need swap can lines on red plug
5 to 3 and 6 to 2
radio display shud work

[auto421]

hello, thanks for the help I'll try after reporting the solution
thanks best regards

[auto421]

dont work another solucion please. tank kyou

[securipro38]

Hi
your radio does not work cause your SCENIC 2 is produced before july 2005 and your radio is a TUNERLIST model but your second dash is produced after july 2005 witch work only with UPDATELIST radio.Check the sticker and you will sell the dash date .
You can see that the version program is not only in 93C56 but also on cpu

[blueangel666]

I have the same problem ! I've flashed eeprom 93c56 of dashboard producted after july 2005 (Version 7.02), with my original dump, version 6.01, producted before july 2005.
Everything is ok, except for Radio stations (clock and temperature work). Infact my Radio is a Tunerlist !

Any solution ??

[pipina]

scenic.JPG

I have the same problem ! I've flashed eeprom 93c56 of dashboard producted after july 2005 (Version 7.02), with my original dump, version 6.01, producted before july 2005.
Everything is ok, except for Radio stations (clock and temperature work). Infact my Radio is a Tunerlist !

Any solution ??

I have same problem today and after research I found what to do, to make dashboard update. You must change eeprom + MCU + CAN driver and remove LC and you have working radio.

regards