HI, L9637D is K-Line driver in your case, see what you can do to connect to it's RX,TX. regards ficho
HI, L9637D is K-Line driver in your case, see what you can do to connect to it's RX,TX. regards ficho
hi.Ficho.
The RX pin 1 and TX pin 4 goes straight to FT232, pin 6 k line goes straight to obd pin 7.
Can you try to draw schematic of your interface so we could take a look at it and see if it is possible to adapt your interface ???
Hi.Ficho.
is easier to buy a new one,
where can I buy with hardware identical to its VW commander 1.4??
KevinXTR (27th February, 2019)
i have same trouble, my vagkcan with PIC18F258, and another pcb, not like ficho pcb, atach pic, is posibile another schematic for this tipe interface ? sorry for clarity pic
I use VAG-K+CAN interface.
MCU: PIC18F248 (SOIC28)
The MCU need to program with universal programmer or Michrochip downloader.
Benefits Ficho's software:
-Read/write ESL old & new.
-Reset/unlock ESL (no need ESL database..)
-Read EIS hc05 (cpu1 and cpu2)
Last edited by bram380; 1st February, 2014 at 01:40 PM. Reason: update EIS HC05
antonypaul (22nd July, 2023), Col19 (28th November, 2022), lion0304 (4th October, 2015), martinracing (26th May, 2020), mexanico1971 (2nd July, 2019), shanektm450 (5th July, 2019), t1tan1 (23rd July, 2014), taxo1965 (24th March, 2022)
Read EIS HC08 are you sure?
Ficho said read only HC05 EIS.
Master01 (1st February, 2014)
OBD2 pin out:
-pin 4,5 = Ground
-pin 7 = K-line
-pin 16 = +12VDC
Here interface picture by Ficho:
16eddi67 (1st February, 2014), dekimin (21st September, 2016), ficho (1st February, 2014), mohamedkey (5th April, 2014), taxo1965 (7th February, 2016)
WHERE IS THE PROGRAM ESL EIS TOOL I CANT FIND IT ON RAR FOLDER
For software and interface check post #1
http://www.digital-kaos.co.uk/forums...l-tool-341365/
t1tan1 (23rd July, 2014)
hi.
can read esl / new elv W204 ?
No, can not read w204 !!!, some exclusive new software's are available for this .
gege974 (25th November, 2018)
Bookmarks