FOR LEXAS kyron dump

[scoot]

hi lexas here is dump thanks scoot

[rabie_m]

what problem ?????

[Lexas]

what problem ?????

seems looking for immo off solution

[scoot]

thanks will try and rerport friend

[Lexas]

try this and report. first disconnect immobox, then connect ecu. pass PM

[scoot]

Hi lexas tried immo off file the engine started but accelerater pedal did not work engine light and glow light on . any further help appreciated regards scoot

[Lexas]

try, same pass

[scoot]

thanks much will report

[scoot]

Hi lexas tried dump car started ran ok until i switched it off ,started it again no pedal working 2faults p1614 control unit eeprom(immo) & p0602 ecu program error help greatly appreciated regards scoot

[Lexas]

Is your original dump from exact car? Cause this happens when you put dump from different car. Injector coding etc. Different... Check differences on your and immo off
Dump. You will see 2 lines corrected. Try to correct only bottom line. If no, means your Ecu coding is missed.
Sent from my Xperia Arc S using Tapatalk 2

[scoot]

ecu is original when i first looked at original dump and immo off dump i thought only 2 lines at the bottom were different but when i compare them now only the top lines are the same .thanks for being so patient

[Lexas]

try to change only 0490 line as in my dump, car should start and work ok. if no acceleration, then coding of some components missing and you need carman scan to fix.

[scoot]

Edited line 0490 put line from your file in and as you said BINGO all works perfect. most would have given up on my problem but you kept on helping i would like to have your knowledge to be able to help other people as you do thanks again lexas regards scoot

[scoot]

update immo stayed off for 2 days then immo light started flashing immo back on thanks to all but all in vain regards scoot