Add new LNB 28 E Help

[Avf130]

Hello.
I have a dm500 and i use vhannibal settings.

Now i have 3 lnb 13E 16 E and 19 E

I want to add 28E
How can i configure the NEW satellite And add bouqetes without loosing the other sats.
I am asking because Vhannibal doesnt have a settings that use the 4 sats im interested

[digicon]

16? east is the oddball out so to speak you would have to download a Multisat list and edit out the ones you dont want

[Avf130]

16? east is the oddball out so to speak you would have to download a Multisat list and edit out the ones you dont want

Im managing to make a Hybrid Settings

[Avf130]

Hello.

Can u tell me a strong/weak frequency so i can use it as a "benchmark" on 28.2E ?

[Avf130]

I have installed 28.2E lnb. i chose as benchmark 11836 H 27500 and i got 79 % quality on that frequency.

I tried other frequencies but they are 0% Could that be a problem with my lnb ?

[Avf130]

Bump !!

[.: JaCkPoT :.]

that transponder may be used on other satellites aswell, therefore youre pointing at the wrong satellite! best way to do it is get a channel list transferred to your box, go on channel 4 (strongest TP) and move your dish slowly until you get a picture. Then go back to sinle screen and tweak for best signal..


Have i helped? Hit the Thanks button below!

[Avf130]

that transponder may be used on other satellites aswell, therefore youre pointing at the wrong satellite! best way to do it is get a channel list transferred to your box, go on channel 4 (strongest TP) and move your dish slowly until you get a picture. Then go back to sinle screen and tweak for best signal..


Have i helped? Hit the Thanks button below!

I tried to load 28.2E vhannibal settings and i couldnt open any channel.

[Avf130]

After hours of attempts i finally got signal.

Now im trying to figure out how to mount the lnb

[.: JaCkPoT :.]

Have any success? LNB mounting should be simple, take a read of my guide here..the bit about LNB skewing may help

http://www.digital-kaos.co.uk/forums...te-dish-11239/

[Avf130]

I got signal on the dish where i have 16E and 19.2.

On the dish that i have 13E i havent got signal

[Avf130]

Bump !
Any idea

[digicon]

Do you have 2 separate Dishes as in one with 16? & 19.2? east and another one with 13? & 28.2? east or are they all on the same dish

[Avf130]

I have 2 dishes 80 cm each

One has 16 and 19.2
One has only 13.

I want to install 28.2 on the dish that has 13e

[digicon]

Then 13? east should be prime focus and 28.2? east should be the offset due to it being the more powerful satellite slot