Hyundai Accent '08 95910-1E900 25640 (95640?) need to clear

**ledojo** · 30th April, 2011, 03:32 AM

I tried clearing it, but the light comes back solid.
I don't have a scantool which can get codes from a hyundai (doh).
Also, I read it as ST95640... the eeprom reads 25640 but 95640 seemed like the best option.
If it helps, it was hit on the side and the side curtain deployed.
Here's the dump.

**AMLGAR** · 30th April, 2011, 04:37 AM

YES 95640.good luck.

. i think you need to.CLEAR DTC AFTER

**ledojo** · 30th April, 2011, 05:07 AM

Originally Posted by AMLGAR

YES 95640.good luck.

. i think you need to.CLEAR DTC AFTER

I won't be able to clear the DTC--any suggestions? Otherwise, I'll have to go ask a friend to see if he's got Hyundai on his scantool...

Thank you, again.

**AMLGAR** · 30th April, 2011, 05:10 AM

[QUOTE=ledojo;1078613]I won't be able to clear the DTC--any suggestions? Otherwise, I'll have to go ask a friend to see if he's got Hyundai on his scantool...

Thank you, again.[/QUOT

well, sometimes have to clear DTC, not all the time. WHAT DTC CODE DO YOU HAVE? I Mean the first time

**ledojo** · 30th April, 2011, 05:44 AM

[quote=AMLGAR;1078617]

Originally Posted by ledojo

I won't be able to clear the DTC--any suggestions? Otherwise, I'll have to go ask a friend to see if he's got Hyundai on his scantool...

Thank you, again.[/QUOT

well, sometimes have to clear DTC, not all the time. WHAT DTC CODE DO YOU HAVE? I Mean the first time

i can't pull codes because my scantool doesn't cover Hyundai's... so, i don't know for sure what is causing codes. As everything has been replaced (except the module), I'm hoping clearing crash data will do it. I'll post an update in the morning.