You have to make tuning on the dyno! Impossible to calculating only using theory!!! Don't make experiments with your car. Find best tunner and the car on the dyno!
Hi there
I have a 2003 AUM mk4 gti with the following modifications:
Stainless exhaust system
Audi tt injectors
4bar fuel pressure regulator
3" MAF
K03S HYBRID TURBO
The hybrid turbo has rs6 internals in it
Rs6 Compressor Wheel, Machined & Ported Compressor Cover, Uprated 360 Degree Thrust Bearing, Rs6 Turbine Wheel, Machined & Ported Turbine Housing, Standard Actuator.
Has anyone made an successful remap on one of these? Also what safe power gains will the car make?
PRESS THANKS + REP IF MY POST HAS HELPED YOU
DPF, EGR , ADBLUE, SPEEDLIMIT, LAMBDA, IMMO
You have to make tuning on the dyno! Impossible to calculating only using theory!!! Don't make experiments with your car. Find best tunner and the car on the dyno!
m3evo (1st November, 2013)
Dyno is the only way?
PRESS THANKS + REP IF MY POST HAS HELPED YOU
DPF, EGR , ADBLUE, SPEEDLIMIT, LAMBDA, IMMO
upload your ori file........please
dyno is the only way .We cant figure out how your hybrid and mods work without Dyno figure and loggs .
this configuration will create problems...is not necessary 4 bar pressure regulator fuel but only calculate appropriate injectors (for power you need) and right estimate for new injection time, lambda, torque etc etc etc.
dyno is not necessary for regulation, you need dyno only to check your final work how much power develops
Dyno is no real advantage. It can be done but needs a few passes with datalogs.
Pro VAG Petrol Tuning | Pro DPF Removal | MED17 TPRot Removal
Tuning without actually measuring datalogging AFR . What a joke. Tuning with out a dyno is like stabbing an intruder in the dark
You will fail
sure you log on the road but road will not tell you the optimal mixture and spark adavance . Dyno will
Most of this forum is not about real tuning. It's about making a quick buck by guessing what the car needs and not actually giving it what it needs
The funniest thing I see on this forum is people looking at a tuned fuel map and saying whether it's good or not . You cannot see what the motor wants
People that own dynos , dataloggers and who are passionate about there work know this. The people making a quick buck tuned file ignore this fact so they can continue making money
Even two motors that are the same will not require the same injector time. There are too many differences in manufacturing , cam timing , cylinder sealing and injector flow rates.
Last edited by ducatisti; 1st November, 2013 at 08:47 PM.
Tuning all superbikes all day everyday
fileservice
Ninja 250, 300
Zx10 all till 2013
Zx14 all till 2013
Panigale , new mts and hypetstrada
Hard to solve map projects , ski-doo done
NEW CBR1000 600 AND VT CRUISER MAPPACKS AND REMAPPING
best files for tfsi and 1.8T vag = Revlimit Forum
Bookmarks