30 seconds from battery is the right procedure but your remote must be the one with the white plastic (very important)
Hi all, who knows how to program the buttons on Suzuki Jimny 2011,
tried all the procedures that I found, but not one does not fit.
I tried as Suzuki Swift, but not successfully,I try programming procedure with removal for 30 seconds negative (-) cable from battery but not work.
Last edited by qwertyuiop12; 22nd June, 2019 at 10:15 PM.
30 seconds from battery is the right procedure but your remote must be the one with the white plastic (very important)
qwertyuiop12 (27th June, 2019)
Can anyone tell
Citroen c2 2006 flip key ,which version choose.
Ori key was 2 button.
Renault ECU tool / IO terminal / A.S.W
drugowaz (4th July, 2019)
Hello,
I see from X-horse have same remotes like Keydiy, is it the same remotes just a diferent names?
Also whats woris me is that from Keydiy there is no big updates for a longer time, are they are OK?
Did they plan to develop some programer on OBD
I can't find if anyone mentioned this but TRUNK button on remote 1K0959753G on Caddy 2007 doesn't work. Car accepts remote and lock/unlock buttons work but trunk button - no go.
Original is working.
Hello, can my keydiy kd-x2 do remote for Hyundai Santafe 2008 Korean martket ( Vin is KMHSJ81VP8U369548) ? The original remote has 447mhz frequence. I used remote simulation function on keydiy kd-x2 for trying programming remote but not successfully. I tried a lot of Hyundai, Kia remote having 447mhz frequence.
Hi all, first post, been lurking a long time but could with some help and thought it was time to try and give back too. I need to program a keydiy remote to a 2010 transporter but the original is a 2 button, Ive tried to put a 3 button remote into one of these vans in the past but with no success, any help appreciated thanks
chinese version remotes is useless for kd mini device?
I think there is a bug in the audi A3 style pcf type remote, tried to make a audi A8/touareg pcf type, from the pc software, it make the remote with success message, but when any botton is pressed the light stays on, when pressed again it goes out.
ps. on Ds pcf style is ok.
Last edited by nazz2; 21st August, 2019 at 01:44 PM.
isnt that normal? most audi remotes i have light stays on permanently if pressed,, until its programmed to the car.
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
like i described above, DS pcf style is ok, when produced but when i produce the aud A3 pcf style, light stays on, i don't think this is normal, unless i am proved wrong and stand corrected. cheers.
Last edited by nazz2; 21st August, 2019 at 07:05 PM.
Fabia 2001 2 button old style which KD remote to choose.
Thanks.
Bookmarks