R270

**Repinator** · 25th November, 2013, 05:12 PM

Last week I received the parcel with blue R270, we wanted to test a CAS3 + ,but when I tie the wires programmer had a surprise pin numbering in the owner's manual does not correspond to the cable sent by the Chinese.
Which picture is correct?
Sorry for my English

**karalada** · 25th November, 2013, 06:06 PM

Right picture correct.

**twincam** · 25th November, 2013, 06:09 PM

First picture is correct Green is pin 1 and Black is pin 26.

**ttzag** · 25th November, 2013, 06:16 PM

work with numbers not with colors

**Repinator** · 25th November, 2013, 10:40 PM

Originally Posted by twincam

First picture is correct Green is pin 1 and Black is pin 26.

you're right

**Repinator** · 25th November, 2013, 10:46 PM

tonight I tried a W211 with 1L85D ... eeprom + flash 100% Ok

**Norman Semos** · 26th November, 2013, 09:38 AM

Try the first pic

**MOBILTRONIC** · 26th November, 2013, 07:54 PM

Hi DK m8s.Pinout from R270,...Regards to all.

**rallyarek** · 26th November, 2013, 10:20 PM

Hi i buy thi programmer r270+ but i have problem with eprom 35080vp can read but cant write andy ideas?

**ohkarol** · 27th November, 2013, 07:53 AM

erase before write

**rallyarek** · 27th November, 2013, 11:03 AM

HI I DO ERASE BUT CAN SOFTWARE START I SEE DESCRIPTION WAIT 1 TO 3 MIN AND NOTHING DO I WAIT 30 MN AND STILL SAME?

**garageozcar** · 6th March, 2014, 10:34 PM

hi
i need read any hc908 with R270
how to make adapter for read hc908 with wif socket or other type connection
please hlp me

thanks

**autodigitec** · 30th May, 2014, 11:54 PM

I had the exact same problem, simply opened the case and checked what pins were GND. The plug was really the wrong way..

**haingoben** · 5th September, 2014, 09:11 AM

hi
Mobiltronic,can u write the r270 pin connection in u're picture because it's more easy to read the pin number fonction PLease!!!
for example pin 1 .......reset!!!
2........BKGD!!!!
tHANKS A LOT