Mercedec c w204 2011yr delphi crd3.10

**AutoM** · 20th December, 2013, 11:18 PM

Had anybodu try to do this car over obd(galletto 2 or samething same). I have read it with galletto 2 without problems, but i am not try to write it because i can't find any pics of boot mod for this car. Any sugestions?

**smayer** · 21st December, 2013, 02:26 AM

No need boot, galleto read and write over obd.

**AutoM** · 21st December, 2013, 10:33 AM

Thx a lot m8!

Thx!

**wiski** · 21st December, 2013, 07:34 PM

Don't forget to put charger as it going to take some time writing

Sent from my GT-I9100

**smayer** · 21st December, 2013, 11:20 PM

Originally Posted by wiski

Don't forget to put charger as it going to take some time writing

Sent from my GT-I9100

yes, about 30 minutes writing.

**mecano_diag** · 11th December, 2015, 05:58 PM

With Fgtech china clone?!!!

**CustomCars** · 11th December, 2015, 08:20 PM

Yes galleto make it without problems..

**mecano_diag** · 11th December, 2015, 09:57 PM

My fgtech china clone do not want to write
^15A2273342132F492131EFD946F38037D6BD1C2849DD9A1043^pimgpsh_fullsize_distr.jpg

**smayer** · 11th December, 2015, 10:03 PM

Identify before write

**mecano_diag** · 11th December, 2015, 10:09 PM

YEs identify,and reading correct,same prob with kess v2 clone ,reading correct and writing not start

**icezero2010** · 12th December, 2015, 09:03 AM

Originally Posted by mecano_diag

YEs identify,and reading correct,same prob with kess v2 clone ,reading correct and writing not start

read and del the dtc`s after that you can write with kess . i have done many .

**smayer** · 13th December, 2015, 12:20 AM

After see the file i supose you can?t write because car refuses to die so young

**adjee** · 15th April, 2018, 07:33 PM

hi
have you some solution to write in CRD3 with fgtech or kess v2 china?

**sdtsedat** · 16th April, 2018, 01:39 PM

One time i do this with Fgtech China, car no start.
Kess v5.017 red pcb china clone works good.

It will no write if your voltage is under 13,5V
I do this now with Kess geniune without problems,

Regards from belgium