I thought that all mb clusters has 1pin as gnd and 4,6 as 12v...
I thought that all mb clusters has 1pin as gnd and 4,6 as 12v...
If I helped you, feel free to drop me that sweet sweet +1 thank you.
Well the best way to find power pins when there are no diagrams is to look at the traces, 12v traces for both power and ignition will be fat and bigger then data ones, so you can find it easily, to find ground find any ground and beep it with multimeter (i.e Screw hole, capacitor ground or chip ground)
If I helped you, feel free to drop me that sweet sweet +1 thank you.
I found this.... maybe it's good, test...
If I helped you, feel free to drop me that sweet sweet +1 thank you.
capi (9th March, 2022), rumensivanov (12th March, 2021), skens (13th November, 2023)
getting this thread back to life :P
I have one old dash VDO from atego
Nothing works,when powering it up.
I tried the pinouts but nothing...
Resoldered everything,cleared it,but still
DID anyone fix it??
Last edited by Stelaras26; 20th November, 2019 at 01:39 PM.
Bump,someone must have fixed it somehow!
ATEGO DASHBOARD PINS.jpg
Here you are. This by the way is the 24v version
haglund (4th May, 2020), McDowell (17th October, 2022), pesona (20th February, 2020), rumensivanov (12th March, 2021), Stelaras26 (23rd April, 2020)
Hi Stelareas26! I'm familiar with Atego Dashboards with score about 95%.
Only what I can't fix from atego are
- MICRONAS IC-s. I can't find data about them at all. I Thing MICRONAS produced it only for Mercedes.
If is on forum someone that know more then me (nothing, zero, 0) please share your knowledge
and
- Display in 'new generation' (about 2004 and above) seems not possible to buy. Probably same reason as MICRONAS. If someone know where to buy please share it.
Older display, ribbon connector can be fixed. It's filigram work but can be done.
New display. Do know someone where to buy?
2020-04-30 11.19.05.jpg2020-04-30 11.18.38.jpg
2020-04-30 11.23.46.jpg
Last edited by booble; 6th June, 2020 at 07:19 PM.
Hi.
I need to repair an Atego instrument. Two components burned in it due to a short circuit. Maybe you know what goes there or have a photo of it. I canceled the short circuit. Caused by soaking.
Thanks for helping me.
Bookmarks