How to: Enable Comand DVD/TV Verhicle in Motion (W211 W219) and more..

**Qrius** · 29th January, 2010, 11:50 PM

Here is how to do it,

In Developer mode :
Audio, Video, Navigation und Telematik ->F3
a screen might pop up with all kind of settings, ignore and press F2
New screen with ESD warning ->F3 COMAND /AUDIO -AUDIO 50 oder COMAND ->F3
Entwicklungsdaten ->F3
Steuergerate-Anpassungen ->F3 Steuergerate-Anpassungen (Variantencoderierung) ->F3
HU Parameter ->F3 scroll down to line: Driving speed is more than 0 kph and
Driving speed is more than 10 kph and BOTH enable them and ->F3 to confirm coding
Now you be able to watch DVD/TV when car is in motion

This procedure won't work for W204 W221 and newer models

If you think this would help you

Please dot not forget to click THANKS

**gmatj** · 30th January, 2010, 10:40 PM

A big thanks from sunny Athens
Rgds
George M.

**malyx_17** · 14th February, 2010, 11:06 AM

Hi,

You know what is the procedure for new cars (W204, W221 ...)

Regards

**Qrius** · 14th February, 2010, 11:50 AM

Originally Posted by Qrius

This procedure won't work for W204 W221 and newer models

What part you do not understand mate ?

**Qrius** · 14th February, 2010, 12:10 PM

Originally Posted by malyx_17

Hi,

You know what is the procedure for new cars (W204, W221 ...)

Regards

Your procedure would be : buy Can-Bus interface and install

**masterross** · 3rd May, 2010, 08:42 PM

I dit it.
Here is the pics guide:
part1:

**masterross** · 14th May, 2010, 07:23 PM

part2:

In the DVD RC you can set code-free.

**Qrius** · 14th May, 2010, 07:51 PM

Nice to see you figured it out mate

Great you added step by step pictures for all other members

**masterross** · 14th May, 2010, 07:53 PM

All credits go to you mate!
Thanks ones again!

**papars** · 14th May, 2010, 10:05 PM

Does this procedure work with the NTG2.5 HDD unit?

**gmatj** · 14th May, 2010, 10:52 PM

Originally Posted by papars

Does this procedure work with the NTG2.5 HDD unit?

No , there is no Video in Motion selection for NTG2.5 - There are a lot other selections though.
Rgds

**ladybreaker** · 29th May, 2010, 11:30 AM

Hello there
I just tryed to do the above with DAS 03/10 and I do not get the same options;
In Hand brake I get to select locked or not locked was default
In grear shift I get to select parked or not parked was default
In driving speed it was set to 0 KM/H and I have not set it to the max 31 KM/H

What is the option "FADER" for??

By the way it is a NTG 2 comand on W164

**Qrius** · 29th May, 2010, 11:53 AM

Originally Posted by ladybreaker

Hello there
I just tryed to do the above with DAS 03/10 and I do not get the same options;
In Hand brake I get to select locked or not locked was default
In grear shift I get to select parked or not parked was default
In driving speed it was set to 0 KM/H and I have not set it to the max 31 KM/H

What is the option "FADER" for??

By the way it is a NTG 2 comand on W164

Fader is used for the balance between the front and rear speaker output