eurovox max red firmware not fit for reciever

**wernley** · 28th May, 2009, 05:55 PM

hi there got an original eurovox red reciver when i try to update the firmware with the correct firmware for this box it comes up with firmware not fit for reciver,any help would be great ty

**satsmo** · 28th May, 2009, 06:09 PM

Its one of two things, one it is not a red (2007) model or two it is the wrong firmware. Also check to see if its a clone or genuine model.

**wernley** · 28th May, 2009, 06:18 PM

its genuine red 2007 checked the best i can,took lid off looked inside got me beat at mo ty for quick responce

**satsmo** · 28th May, 2009, 06:21 PM

Which firmware have you tried? Have you tried blue firmware also?

**wernley** · 28th May, 2009, 06:21 PM

plus ive downloaded the red firmware

UFL_MAX_RED_30_11_08

**satsmo** · 28th May, 2009, 06:27 PM

As above have you tried blue?

**wernley** · 28th May, 2009, 06:33 PM

yes pal the same happens

**satsmo** · 28th May, 2009, 06:37 PM

If you are 100% sure that it is definitely a red, try earlier firmware revisions. They will not AU but see if they flash and then we can go from there.

**wernley** · 28th May, 2009, 06:41 PM

tryed every red firmware will not load same message,the box is in standbye mode stuck on now but i boot up and get message if u know what i mean,hard reset

**wernley** · 28th May, 2009, 06:42 PM

is there a original firmware that might reset to source??

gazza2008 · 28th May, 2009, 06:46 PM

Originally Posted by wernley

is there a original firmware that might reset to source??

this is gonna sound silly.......wot is ya box like at the front is it all black or is there silver on the front..

be careful coz if u dont put the right firmware on ya box it can brick it