eagle 1000, no output and green light
Register
Results 1 to 2 of 2
  1. #1
    Newbie
    Join Date
    Nov 2009
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    1
    Uploads
    0

    Default eagle 1000, no output and green light

    hi there,

    i was sent a eagle 1000 by a friend booted it up and commando 14.7 was installed i decided to open up DCC and flash it with OpenPLi-beta-dm500-20130505-305 via LAN

    DCC uploaded the new image erased the flash and flashed the new image

    at this point it said if it does not restart do a manual restart i waited 2 or so minutes and my box did nothing so i unplugged it and plugged it back in when it rebooted it had no output, green light and network lights came on and did nothing else

    in hindsight i should have left it on commando 14.7 not knowing much as yet.....

    is it possible to recover this using the null modem or have i bricked my box?

    i honestly do not fancy looking at jtag as my soldering skills suck

    any help would be appreciated, i have ordered a null modem cable from ebay and it should be here by the end of the week

    additionally when i power up my box my tv detects the scart and auto switches and switches back when the box is unplugged if this help

    Thanks
    Last edited by hostaway; 16th January, 2014 at 01:17 AM.

  2. #2
    DK Veteran psats's Avatar
    Join Date
    Sep 2008
    Posts
    826
    Thanks
    5
    Thanked 39 Times in 34 Posts
    Downloads
    126
    Uploads
    0

    Default


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •