satlink ws 6906
Register
Results 1 to 9 of 9

Thread: satlink ws 6906

  1. #1
    Newbie
    Join Date
    Apr 2013
    Posts
    4
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Downloads
    0
    Uploads
    0

    Default satlink ws 6906

    just received 6906 from china ... have a firmware problem ... china want it returned but before i do can some one send me a complete dumpfile from theres so i can try as i cannot find original firmware any where and think it might sort problem ... thanks

  2. The Following User Says Thank You to Jayja For This Useful Post:

    jaragone (13th November, 2014)

  3. #2
    V.I.P. Member
    Join Date
    Jun 2009
    Posts
    2,481
    Thanks
    27
    Thanked 79 Times in 67 Posts
    Downloads
    15
    Uploads
    0

    Default

    Dont know if any of this is of use to you they are files I collected some time ago but have never had to try them.
    Attached Files Attached Files

  4. The Following 3 Users Say Thank You to dick b For This Useful Post:

    jaragone (13th November, 2014),Myfinder (10th October, 2019),saidou04291 (26th March, 2018)

  5. #3
    Newbie
    Join Date
    Apr 2013
    Posts
    4
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Downloads
    0
    Uploads
    0

    Default

    tried them all .. seems like i need factory setting file as the updates just do nothing ... must be an internal problem ... thanks anyway .. could do with someone who has one to dump there whole system as a back up and upload that ...

  6. The Following User Says Thank You to Jayja For This Useful Post:

    jaragone (13th November, 2014)

  7. #4
    DK Veteran shaunfree's Avatar
    Join Date
    Nov 2008
    Location
    lancs
    Posts
    584
    Thanks
    93
    Thanked 85 Times in 58 Posts
    Downloads
    78
    Uploads
    0

    Default

    hi jayja try these mate contains 3 files. ws 6906 original bin file,EU satlinink bin + upgrade exe. WS 6906 software.rar how to satlink.JPG cheers shaun
    Last edited by shaunfree; 26th January, 2014 at 12:15 AM.

  8. The Following 2 Users Say Thank You to shaunfree For This Useful Post:

    jaragone (13th November, 2014),satalightmad (9th July, 2014)

  9. #5
    Junior Member
    Join Date
    Feb 2012
    Posts
    28
    Thanks
    0
    Thanked 1 Time in 1 Post
    Downloads
    2
    Uploads
    0

    Default

    Hi
    I have tried mine for the first time last night and would like some assistance from someone who is familiar with this meter. I had 0.8W selected and when to the selection for 'reference satellite'. Pressed OK and the motor moved to 0.8. Tuned the dish into that position, but do I have to reselect another sat say 19E and then hit the 'reference satellite' again for it to move to that position?

    Any assistance would be much appreciated as the manual does not give the finer points of actually how to use it. I expect it would be easy for a professional installer but a bit of guidance for the layman would be great.

    Regards

  10. The Following User Says Thank You to madaboutlotus For This Useful Post:

    jaragone (13th November, 2014)

  11. #6
    V.I.P. Member
    Join Date
    Jun 2009
    Posts
    2,481
    Thanks
    27
    Thanked 79 Times in 67 Posts
    Downloads
    15
    Uploads
    0

    Default

    these instructions are for "usals"
    I"v never used mine to drive the motor.and use it this way.I scan channels in from an existing dish/motor,if you only have a sly dish just scan 28.2E in. then using the box put your local lat/long in and send the dish to your chossen sat disconnect the cable from the lnb and using a fly lead connect the meter up and select the sat with an active TP/channel you have sent the motor to.then you can turn the whole motor/dish assembly L/R and the dish only up/down to tune the sat in.Its a nice and easy meter to use but using it to drive a motor will flatten the battery in no time.

    PS once you have your target sat tuned in correctly with usals all the other sats will fall into place automatically subject to your mounting pole being 100% plumb and the dish 100% central on the motor spigot.
    Last edited by dick b; 4th April, 2014 at 12:07 PM.

  12. The Following User Says Thank You to dick b For This Useful Post:

    satalightmad (9th July, 2014)

  13. #7
    Newbie
    Join Date
    Apr 2018
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default

    hello i can't download the eu firmware. can you post the last firmware for the satlink ws 6906. thanks

  14. #8
    Newbie
    Join Date
    Dec 2018
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default

    Old thread, but does anyone have updated salelite-database for the 6906?

  15. #9
    Newbie
    Join Date
    Jun 2019
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Default

    Hola, this archive is from ws -6906 ?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •