Hi guys,
have anybody please ori file to this unit?
Sagem S3000
R MII 1.6 16V K4M 761
820098457
21584288-2A
4028 149831
8200321263
Many thanks
Hi guys,
have anybody please ori file to this unit?
Sagem S3000
R MII 1.6 16V K4M 761
820098457
21584288-2A
4028 149831
8200321263
Many thanks
1.6 16v megan s300 virgin
ahmad emamy (31st August, 2022), alclot (13th November, 2018), datapage (12th September, 2014), KWP2000 (23rd June, 2017), martinracing (10th August, 2015), matias (11th February, 2014), n599fbm (14th July, 2014), pawelelectro (4th December, 2014), Stelaras26 (18th December, 2019), tamer1024 (21st March, 2019), zigzag2588 (8th November, 2016)
Many thanks,
but I need for flash. I need rewrite engine data.
No immo, etc.
Sorry for my mistake.
Best regards
Matias
Renault Megane II petrol 1.6 16V S3000 ori file
Many thx autoecu. I try this today and willl give report.
And pass pls. :-)
Last edited by matias; 11th February, 2014 at 08:02 AM.
Can you send me the pass for this please?
Thanks
i have FG54 (of ecutool) and only can reading but can't write dump 512Kb on the S3000 Renault
anyone have experience ?
http://www.digital-kaos.co.uk/forums...ml#post2348664
please help me if possible
thanks
Maybe a problem of this pcb and soldering ???!!!
anyone have experience ?
I test with OS xp & 7 can't write (ECU correct)
Thanks
s3000 file kess , magprog =64 kb
virgen ecu new program module obd2 bench.
drive ecu module used only in off instrumentoobd2 panel. not program the ECU bench used.
total file, ktag, piassini work ok.
I try for reading dump 64kb via obd with FG54 (of ECUTOOLS) Read ok
but i try a file 2000 another car on the 1600 write ok but Injection Fault and car can't start
i try for again write can't connected with ECU give me error SK1 , Error SilentkeyLettura
CAR good , voltage 13.2 , ECU S3000 MeganeII good
Teat with IGN ON
what is error SK1 ?
i have 2 dump 1600 & 2000 good car 64Kb , but can't write .
Can i do ? please help me.
Last edited by amir_82013; 30th September, 2014 at 04:15 PM.
Please Help me if possible...
how i can write good dump ? i have dump 512 & 64 kb but can't write
what is good tools for this work ? FG or piashini or ECU Jtag or ... ?
Hi
K-tag.
Br.
enjoy your work
Bookmarks