hi all i cant get the incubus to work.. cant dowload plugins in the black pearl img.
and the incubuc 5 don?t work .
please help..
IncubusCamd ver 0.8.3+ NewCS 1.66
NewCS - 1.66 RC1
Changelog
v.1.66 RC1
All cdks are new, due to server crash.. many many changes to libs etc.
Support for TNTSAT.
Experimental support for *** 0963. NB! Remember to put the 4 byte hex boxkey in config!
Multi-realms added to chameleon.
Support for pin-code on specific channels specified by in config.
Added the ability to disable/enable certain virtualcards on chameleon in config, or disable whole list.
Quote:
NB! NewCS has gone green - removed all support for windows
Time to grow up, get a powerfriendly little linux-device to run NewCS on!
coming soon on our panel...
wait please
Last edited by aftermath; 2nd October, 2009 at 04:58 PM.
IP Box HD 9000 2xS2 tuner
Dreambox 7025-SS
Smart MX 28-IDTE IQ 2040
Sammy 9500-Sammy 9400-Sammy 9000
Triax 120 cm-Titanium 2 LNB's
hi all i cant get the incubus to work.. cant dowload plugins in the black pearl img.
and the incubuc 5 don?t work .
please help..
I take it its a Kathrein box you got ?
Please find config as requested, I am never sure if you can remove all the garbage and just leave the server details:
################################################## ############################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################################## ############################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
background_execution=1
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
debug_level=1
# This option enables (1) or disables (0) the writing of debug information to the
# console.
log_to_console=1
# This option enables (1) or disables (0) the writing of console output to a log file
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
logfile_name=/var/bin/incubusCamd.log
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=1
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
#When activated, camd will listen on the specified port for connections. All
#log activity will be broadcast in real-time to connected clients.
console_logs_broadcast=1
console_logs_broadcast_port=666
############################ caid configuration ##############################
#
# First of all the cam use the incubusCamd.prio file, then use the
# configuration below.
# Sections are defined by the value of the CaID.
# You can choose the default ecm table used by the codify, this means that
# you can choose the first byte of the raw ecm that is downloaded from sat.
# If you don't know what value to insert, use "80". (all value are in hex)
# Default value for ecm_table is 0x80.
# The option "priority" tells if one caid should be selected before try
# another one with a priority value greater.
# The less is the value the greatest is the priority. Choose from "0" to any value,
# priority value is decimal.
#
[CaID:0100]
ecm_table=80
priority=1
[CaID:0500]
ecm_table=80
priority=1
[CaID:0600]
ecm_table=80
priority=1
[CaID:0919]
ecm_table=80
priority=1
[CaID:093B]
ecm_table=80
priority=1
[CaID:0B00]
ecm_table=80
priority=1
[CaID:0D00]
ecm_table=80
priority=1
[CaID:1700]
ecm_table=80
priority=1
[CaID:1800]
ecm_table=80
priority=1
[CaID:2600]
ecm_table=80
priority=1
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000501:CaID:1833]
# ----------------------------------------------------------------------------
# Decoder type indicates whether the cam will attempt to decode this provider
# in software, or through a card-server. Supported values are:
#
# 0 - Use internal softcams.
# 1 - Connect to a card sharing protocol card-server.
decoder_type=1
# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostname>:<port>/<des_key>
# aroureos://@<hostname>:<port>
# radegast://@<hostname>:<port>
#
# Example:
# newcamd://foo:bar@192.168.0.100:12345/0CE3476FF2E1C9D9A0A109B371E3
#
# Multiple card-server url's can be specified for server fail-over.
# If the emu fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 16 servers can be added from index 0 to 15.
#
# You can choose also to select a cccam or gbox server, but they must be declared
# in the "servers configuration" section ( [Servers] ).
# e.g. : if you want to use a cccam server for a provider you must put it on
# the parameter card_server_url_0=cccam://
# NO MATTER the value after the double slash because server configuration is
# made in the section [Servers].
# Only for newcamd, radegast and aroureos is usefull to put correct connection
# parameters because they are provider dependent.
#
#
# Example i want to use mine card into the slot with newcs for prov 0501 on nagra3 (caid 1833)
card_server_url_0=newcamd://usernameassword@192.168.0.100:10550/0102030405060708091011121314
[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
card_server_url_0=cccam://
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# cccam://brianblythe2006:ser732009@xxxxxx:12000/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
# gbox://<localhost>:<localport>:<password>@<peer_address>: <peer_port>:<peer_pass>/[EMM]
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
card_server_url=cccam://brianblythe2006:ser732009@xxxxx:12000
card_server_url=cccam://<username>:<password>@<hostname>:<port>
card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>: <peer_port>:<peer_pass>
card_server_url=cccam://<username>:<password>@<hostname>:<port>
card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>: <peer_port>:<peer_pass>
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
# 1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
# 1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
#
Many thanks in advance
Hypercam 1.04 multi receivers
*************************
Release 1.04
=> Added one type of *** card support
=> Added hypercam.status file, see configuration file for settings
=> Fixed clear => crypted switch for some channel not providing new PMT
Thanks for Hypercam Devs for this piece of software !
hypercam.1.04.7z
IP Box HD 9000 2xS2 tuner
Dreambox 7025-SS
Smart MX 28-IDTE IQ 2040
Sammy 9500-Sammy 9400-Sammy 9000
Triax 120 cm-Titanium 2 LNB's
why in start of task there are this errors:
cuberevo-250hd:/var/bin# start_hypercam.sh
killall: mgcamd: no process killed
killall: mg_launcher: no process killed
killall: newcs: no process killed
rmmod: sci: No such file or directory
killall: hypercam.ipbox: no process killed
/var/bin/api3-wrapper.sh: line 9: syntax error: "(" unexpected
/var/bin/start_hypercam.sh: line 12: /var/bin/sci-ng.sh: not found
Is non compatible with cuberevo 250hd?
thank's
Hypercam 1.05
**********************
=> Fixed clear => crypted switch / Dreambox PPC specific operations
=> Workaround for Dreambox PPC poor smartcard drivers timing...
hypercam.1.05.7z
IP Box HD 9000 2xS2 tuner
Dreambox 7025-SS
Smart MX 28-IDTE IQ 2040
Sammy 9500-Sammy 9400-Sammy 9000
Triax 120 cm-Titanium 2 LNB's
Hypercam 1.0.6
Hypercam 1.06
Release 1.06
******************
=> Fixed card support on Dreambox PPC for N2/N3/IRDETO/***
=> Fixed streaming decryption on Dreambox PPC
Last edited by aftermath; 2nd October, 2009 at 04:58 PM.
IP Box HD 9000 2xS2 tuner
Dreambox 7025-SS
Smart MX 28-IDTE IQ 2040
Sammy 9500-Sammy 9400-Sammy 9000
Triax 120 cm-Titanium 2 LNB's
@dan yes it will
boom!
thank you.
did it work on qbox_hd also?
hello.
on my qbox run newcs well.
another receiver like dream or dbox can connect to my box also well.
but myself cannot connect to newcs.
not incubus or hypercam.
what make i wrong?
in incubus conf i activated newcamd line.
can anybody help me?
thx
IncubusCamd 0.85
.
.
.
.
.
.
18/06/2009, V0.85
- deleted old priority system for caid, now will be used firstly the prio and then a cycle selection
- SID in hex value instead of dec one
- fixed some bugs on caid ecm parsing
- fixes for stability/less-crashes (crashes were made by the pmt handling, using pmt file wich the writes is slower than the channel change,
now should be fixed in almost all cases)
- still open the 2.1.1 protocol support and previous version
- fixed a bug on reading keys for the internal emulator, now also unsupported softcam.key files are skipped in the unknown fields
(read the softcam.key file to see how to build a new one)
Last edited by aftermath; 2nd October, 2009 at 04:58 PM.
hi.
i have incubus,but i will use my softcam.key for digitv.
what should i do?
i have write follow lines into the conf
[Prov:002111:CaID:0000]
# ----------------------------------------------------------------------------
decoder_type=0
but the didn?t work.
whats wrong?
thx
Bookmarks