DPA5 Full Firmware

**mihaiservice** · 5th March, 2014, 08:32 PM

Hi
i have genuine Dpa5 Quad Can but after one wrong update i have locked mcu Lpc2294.
Now i have replace mcu from Dpa board but dont have all 17 page of flash file
Please if someone can help me with full firmware or only flash page 0 to 3 will be perfect !dont matter if are Dpa Dual Can,Quad Can or CNH EST hw
I have build two different tutorial with settings and some info how to read this kind of mcu Lpc229X :
1.For those who have used Flash Magic software
2.For those who have used Jlink software

I need only flash file from adress 00h to 7FFFh or you can set in sw how many pages or addresses want to read it
For more instruction please read one of these two tutorial ,can find pinout and more!

Many thx !

Mike

ps.please if someone can build any project for Ulink or can help me with any kind of info just send one PM !

**mihaiservice** · 9th March, 2014, 06:28 PM

It seems I'm the only user of this type of interface or even no one wants to see my tutorial?
What should I make of this? No offence gentlemen,but if someone had posted some software that works with this interface will be more then 100 download in first day !
And other more then 100 will ask for pass or as someone said "like bears to honey"
It is so hard to connect 6 wires on pcb ?Do not need any special interface,i think all I had in the office one USB-Serial cable or any old interface with FT232R like Vagcom or Opcom..

Thank you

Mike

**mihaiservice** · 9th April, 2014, 09:16 AM

Hi
after many days i have manage to finish hex firmware for Dpa5 QUAD CAN!
if someone it have orig CNH EST hw and if can read mcu LPC2292 with Jlink will be great,i can exchange firmware from Dpa5 Dual/Quad Can for CNH EST,also i provide modification on pcb from Dpa5 to CNH Est hw !
here you can watch one tutorial with firmware update using Jlink,the link will be available for 7 days:

many thx !

Mike