***Toyota Smart Lost Key Solution - No Id code needed***

[ramago]

brand new key

PG1 = 98
PG2 = 07
PG3 =722A7F1D
PG8 = 98242CAB74

[autohaus]

hi guys please add this key to my smart box for my yaris vitz

PG1 = 94
PG2 = D9
PG3 = 017E3D1A
PG6 = 017E3D1AD9
PG8 = 94300EC30B
PG9 = 94495307F6

[autohaus]

hi guys please add this key to my smart box for my yaris vitz

PG1 = 94
PG2 = D9
PG3 = 017E3D1A
PG6 = 017E3D1AD9
PG8 = 94300EC30B
PG9 = 94495307F6

SOLVED WITH FVDI........

[metallo]

Hello, i have a problem with this toyota RAV4 year 2008 with smart key, it came with a crushed key which i managed to recover but even if remote works and when i push clutch pedal start/stop light becomes green, car doesn't crank and steering lock doesn't lock/unlock, is it possible it's due to a sync between ecus? any other suggestions?
I'll post all the dumps from idbox, smart key ecu and steering lock.

[usman4]

Hello, i have a problem with this toyota RAV4 year 2008 with smart key, it came with a crushed key which i managed to recover but even if remote works and when i push clutch pedal start/stop light becomes green, car doesn't crank and steering lock doesn't lock/unlock, is it possible it's due to a sync between ecus? any other suggestions?
I'll post all the dumps from idbox, smart key ecu and steering lock.

Write the dump in id code and esl then report back.

[metallo]

could you give me the pass?

[Anachem]

Hello, i have a problem with this toyota RAV4 year 2008 with smart key, it came with a crushed key which i managed to recover but even if remote works and when i push clutch pedal start/stop light becomes green, car doesn't crank and steering lock doesn't lock/unlock, is it possible it's due to a sync between ecus? any other suggestions?
I'll post all the dumps from idbox, smart key ecu and steering lock.

Write IDcodsync file in IDCode eccu. if car start and shutoff then jumper DLC 4 and 13 for 35 min.

[metallo]

Write IDcodsync file in IDCode eccu. if car start and shutoff then jumper DLC 4 and 13 for 35 min.

Thanks mate! now it cranks and starts but immediately shuts off i've tried short dlc pin 4to13 with no result also steering lock works fine... maybe even engine ecu has to be synched? i'll post all dumps including engine ecu

[Anachem]

Thanks mate! now it cranks and starts but immediately shuts off i've tried short dlc pin 4to13 with no result also steering lock works fine... maybe even engine ecu has to be synched? i'll post all dumps including engine ecu

Write ecusync file in ECURom.

[metallo]

Write ecusync file in ECURom.

Anyway i've tried the ecu file and it does the same, so i've tried to manually modify the ecu eeprom zones which seemed to be immo to sync it and shorting pins 4-13 on dlc but i'm still stuck at car starting and stalling...

[metallo]

Anyway i've tried the ecu file and it does the same, so i've tried to manually modify the ecu eeprom zones which seemed to be immo to sync it and shorting pins 4-13 on dlc but i'm still stuck at car starting and stalling...

SOLVED my id code ecu had problem in eeprom, watching other car dumps i was able to rewrite a functioning file

[KOLYAN39]

Hello! Please help me put the key in the smart dump 93с86. Highlander 2008. 89990-48020

[KOLYAN39]

that's all, don't, we found the keys ... thanks.

[julespatch]

Hi guys
I've got a 2019 LandCruiser with no keys. I've got the smart box unit and we read the 93c66 mini eeprom but the file was wrong and Autel im608 wouldn't accept it to program the smart simulator.
Can we read the B32R D76F 0167?
It looks like the part is from 2017 so surely it should be possible.
Obviously we have tried in the car but no good.
Pics attached

[ruffles1986]

I need add this key to dump.
PG1:98
PG2:18
PG3:424E441A
PG8:74ED373198

Thanks in advanvce!