***Toyota Smart Lost Key Solution - No Id code needed***

[rob h]

If i would write a virgin dump in to the smartbox.
Then i can add keys, but have to synch to steeringlock, and ecu.

I you add keys to my dump, i will keep the synch?

Will techstream V.10.30.029 help me to synch steering lock?

I am hoping to upgrade to V.11.10.039 soon.
But i do not know if it covers the new Aygo (KGB40).

I found the partnumber for these smartkeys now, 89904-0H010

These are the tools i now have, techstream Tango, and skp900.

[Brayn]

If i would write a virgin dump in to the smartbox.
Then i can add keys, but have to synch to steeringlock, and ecu.

I you add keys to my dump, i will keep the synch?

Will techstream V.10.30.029 help me to synch steering lock?

I am hoping to upgrade to V.11.10.039 soon.
But i do not know if it covers the new Aygo (KGB40).

I found the partnumber for these smartkeys now, 89904-0H010

These are the tools i now have, techstream Tango, and skp900.

If you reset smart ecu, you can add keys and no need to synchronise system.
Techstream any version can do that.


Sent from my C5502 using Tapatalk

[siyadk]

If i would write a virgin dump in to the smartbox.
Then i can add keys, but have to synch to steeringlock, and ecu.

I you add keys to my dump, i will keep the synch?

Will techstream V.10.30.029 help me to synch steering lock?

I am hoping to upgrade to V.11.10.039 soon.
But i do not know if it covers the new Aygo (KGB40).

I found the partnumber for these smartkeys now, 89904-0H010

These are the tools i now have, techstream Tango, and skp900.

A lot of confusion going on, so let me keep this simple as possible

you have three options ( in most of toyota smart systems)

1. Adding keys to Dump manually:-post smart box dump and key data. Once you get new dump with key added, you will get ign on and can program the new keys in. You will not lose any sync codes. however this requires new(aka virgin) key. if you have used key, of course you can reset it with tango, tm100, mk3 and now with vvdi2 to make it virgin all over again and add like a new key. this option doesn't require to pull id code box which saves a lot of time, money and labour. For me typically takes 10 to 15 mins max


2. RESETTING DUMPS:-Resetting smart box and id code box dumps,post dumps here, most of them here in dk can reset the dumps. this again will not lose any sync and can program even an used key to it. However disadvantage to this option is to get id code box which is very hard to get and mostly half a day job. A lot of waste time and labour

3. VIRGINISING Dumps or "New smart box and Id code box" from dealer : Virginising smart box and id code dumps, again used key can be used and need to sync id code box to ECU by short 4 and 13. ESL will sync automatically.However getting virgin dumps are hard or else you need buy both ecu from dealer, therefore i dont prefer this method because this needs a lot of labour again to pull id code box and money if need to buy new ecu from dealer or time and patience to keep hunting for virgin dumps