Write the bar code here, or if you know how to match pektron with the ecu, i have a virgin file, your choice.
Hi friends. I have ROVER MG ZR 1.4 petrol year 2005. The alarm system is blocked and does not work the remote control for the car to start. I can fix make immo off in ecu, but I want to run the command key. Does anyone know how to make virgin e2prom of the alarm ecu for matching?
Thanks in advance
Write the bar code here, or if you know how to match pektron with the ecu, i have a virgin file, your choice.
alclot (27th March, 2014)
Hi nazz2. Please send me file virgin and i try match with diag machine.
Thanks in advance
bar code SARRFXNBV5D795441
your bar code is wrong, few charachters missing, below is the dump from a new pektron unit.
alclot (27th March, 2014), kokkinos panos (3rd June, 2021), Louislesinge (10th April, 2021), vitimax (7th April, 2021)
Hello
Please add this key with barcode 818AE08A8E1787B73279 into the dump of module YWC001541.
https://www.dropbox.com/s/0nucm53frh...01541.bin?dl=0
Thanks in advance
Last edited by vitimax; 9th April, 2021 at 08:26 AM.
Post your dump in here, i will give it tomorrow when i get few minutes.
Here is my dump 93lc66a_8bit_pektron_ywc001541.bin
Key barcode is 818AE08A8E1787B73279
Last edited by vitimax; 10th April, 2021 at 07:08 AM.
Your bar code added.
Thanks a lot. I wrote your dump into module and remote began to work.
Last edited by vitimax; 12th April, 2021 at 01:57 PM.
Bookmarks