HELP TO READ 1D69J WITH ORANGE 5

[petarcanev]

I NEED READ EAM MERCEDES ML270 2003 MOTOROLLA 1D69J WITH ORANGE 5

[electrones]

I NEED READ EAM MERCEDES ML270 2003 MOTOROLLA 1D69J WITH ORANGE 5

HI m8

With Xprog: http://www.digital-kaos.co.uk/forums...please-383124/

Cheers

[petarcanev]

thanks electrones not have x-prog i have orange 5

[ttzag]

remove it from PCB
solder to adapter hc05x
select MC68HC05X32
press skip security if not success select MC68HC05X32 div5 then press skip security again then read

[petarcanev]

thank you friend thank you......

[LEORNARD NKATA]

remove it from PCB
solder to adapter hc05x
select MC68HC05X32
press skip security if not success select MC68HC05X32 div5 then press skip security again then read

a

i have a similar problem was trying to read eis with 1d69j and it read first line and failed now its just reading fffffff please help

[remote doctor]

a

i have a similar problem was trying to read eis with 1d69j and it read first line and failed now its just reading fffffff please help

did you get it fixed? i am about to read this tomorrow so want to know if you successfully read it. thank you in advance.

[Panathaole]

did you get it fixed? i am about to read this tomorrow so want to know if you successfully read it. thank you in advance.

orange 5 clone not work good with this mask(but can read rom & rom1 fine)..... xprog works better....... be very carefuller with this mcu, is very sensitive in heat....

[nazz2]

i have original orange and omega, but i can only read the above mcu with omega, not ornage5.

[fred77]

a

i have a similar problem was trying to read eis with 1d69j and it read first line and failed now its just reading fffffff please help

sadly u may have wiped it. Genuine gr8 tool it's 100% ish safe but must do security 1st.
feel for u mate i was told how to use tool by other forum . instructions terrible

Maybe best do an ebay search n just replace whole ecu set to fix. Not too expensive to save reputation


Naz mate i've always done these old mercs with orange by removing - but been sum 12 months i only get newer ones now.
will call u my pal

[nazz2]

Ii may be something wrong with my gear, i have never managed to read that mcu with orange zif adapter or the board, but always managed with my omega. talk soon.

[Panathaole]

Ii may be something wrong with my gear, i have never managed to read that mcu with orange zif adapter or the board, but always managed with my omega. talk soon.

as i told, my Orange 5 (clone) some times read that mcu and some not, i notice that if i don't have very good soldering the legs in adapter i get error... after a good solder it can read the eeprom(it may be random)
, but not write it back.......