program key toyota aygo 2008

[dollarbill]

hello for all

i would you program a key on toyota aygo 2008 i used my avdi (original) i program a key but the car don't start please verify my dumps
the data of key
texas 4D
page 1: B3 locked
page 2: E2 locked
page 3: DD155816 locked
i must do a reset by lin connection ?

thanks for answer

[yssf]

with due respect of toyota masters, gwee,brams and so on...
your key is id70 and usually need pg1:33 or 53 according to your dump,i add your key in 53 position,you can give a try but i'm not sure if it will work.
if not post 33 or 53,I ALWAYS USE 33 OR 53.
find password in your pm.
or here:which model of toyota is your car(guess).

no doubt it always works for me.

[gadroulll]

IT looks ok if not work try to change it 1 place or 2 place ,you have program key 3 . tells us if works

[dollarbill]

thanks for all reply i try to change a place of key 0-1-2 but nothing change the car don't start
i check with avdi i have 2 errors
IN IMMOBILISER B2794: UNMATCHED ENCRYPTION CODE
IN ECU: B2799: ENGINE IMMOBILISER MALFUNCTION register the immobiliser to the engine ecu with the on but engine not running short terminal tc(pin13) _cg(pin5) in the dlc/obdII connector. leave it like this for 30 min
i short pin 13 and pin 5 30 min but it's same. i do a reset with lexia it's the same i don't understand if someone have a idea

[keysph]

try pin 4 and 13 from OBD

[cjawahir]

hello install this file with your key also you need to write 50 13 56 57 32 TO PAGE 4 .

all pages locked .

or you can use a new 4d 60 and write in page 4 lock it , and follow the same structure .

cj

[yssf]

thanks for all reply i try to change a place of key 0-1-2 but nothing change the car don't start
i check with avdi i have 2 errors
IN IMMOBILISER B2794: UNMATCHED ENCRYPTION CODE
IN ECU: B2799: ENGINE IMMOBILISER MALFUNCTION register the immobiliser to the engine ecu with the on but engine not running short terminal tc(pin13) _cg(pin5) in the dlc/obdII connector. leave it like this for 30 min
i short pin 13 and pin 5 30 min but it's same. i do a reset with lexia it's the same i don't understand if someone have a idea

you need to write pg1:33 or 53 as i told you in my first post,note that you can't write key pg1:33 in position of pg1:53 you must respect the position accordingly, i've experienced it.
where i wrote your key the position is for pg1:53 and the next key in the left is for pg1:33,or post another key pg1:33 or 53 i'll write it for you.

[ngakson2002]

hello for all

i would you program a key on toyota aygo 2008 i used my avdi (original) i program a key but the car don't start please verify my dumps
the data of key
texas 4D
page 1: B3 locked
page 2: E2 locked
page 3: DD155816 locked
i must do a reset by lin connection ?

thanks for answer

Here is your dump with your key ADDED in position 1


Good luck

[TeL200]

All above dumps will not work!!

Dollarbill, Your B3 key in position 3 is fine, but the key count is still only 2 (everyone has missed it)

Use file below

[bram380]

This Aygo use ID70 page1. 33, 53 or 93.
ID70 B3 won't work for this cars.

[TeL200]

DST 70 B3 is correct for key positions 3,4,5,6,7 and 8

A dealer supplied key will contain DST 70 B3, but a 93 will work in the above positions too.

The problem with Dollarbill's dump was the checksum was only for 2 keys, adding key 3 requires a change in the checksum.

[dollarbill]

This Aygo use ID70 page1. 33, 53 or 93.
ID70 B3 won't work for this cars.

yes dont work for this car i used tpx2 and good (pg 33) thanks you for all help and respect