Fiorino 1.3JTD DTC off

[meteor80]

Hello.
Can someone help with DTC off in this unit:
Magneti Marelli

51846260 6F3.H1 HW04P

P0601 or all DTC tables.

[Babos]

take es and all table be off

[zoyzoyni]

mate p0601 is your only foult code you have?if yes maybe not ecu fail but the plastic barrel round the key?did the car make check when swich on?

[meteor80]

Hello.
I have only one fault code P0601.
Car is after crash mileage correction and I don't know is that my fault or maybe it was before.
Car starts fine and works OK.

Of course I don't need to remove all DTC table because I have only P0601.
I don't know the procedure how is faster to remove one DTC or all the table.

[Babos]

here mod file.
Best regards.

[zoyzoyni]

thats the reasoi ask mate.in punto-fiorino this is commonproblem.the solusion is plastic barrel with key ring.the other way is babos file.good luck.

[meteor80]

thats the reasoi ask mate.in punto-fiorino this is commonproblem.the solusion is plastic barrel with key ring.the other way is babos file.good luck.

Sorry but I don't understand.

[zoyzoyni]

fiorino and punto with p0601 have two reaction.1st car dont make check when swich on and dont start.2nt everything works fine as yours. in the first is ecu fail.2nt is the ring where you insert the key.this is what it happent in my case.first i change ecu cause i never test dtc remove and the other the barrel ring.

[slave]

post results

[meteor80]

With Babos file I have DTC U0426 and car starts only once.

WIth Slave file car starts but I have P0087, P0645, U1706, P0110.

[FAP 0ff]

I have tested solution for dtc in this ecu. PM me

[mario38]

With Babos file I have DTC U0426 and car starts only once.

WIth Slave file car starts but I have P0087, P0645, U1706, P0110.

hello if you want to cancel P0601
1 You need to read your ECU
2 calculate well cks
3 write the new file inside your ECU cks ok


this error is a problem of incorrect calculation of cks

[meteor80]

hello if you want to cancel P0601
1 You need to read your ECU
2 calculate well cks
3 write the new file inside your ECU cks ok


this error is a problem of incorrect calculation of cks

But cks is calculated by program.
In this case galetto v52.


Wysłane z mojego P780 przy użyciu Tapatalka

[mario38]

But cks is calculated by program.
In this case galetto v52.


Wysłane z mojego P780 przy użyciu Tapatalka

maybe your galletto v52 did not calculate well the cks .. your error depends on this

[meteor80]

Hmm.
It says that checksum is calculated.