Connect to obd or diag is easy. I try post maybe tomorrow.
Any one have fixed staking pump motor problem, then have errors about pump motors plug or pump motor.?
New update
The metal tube inside the hole is NOT moving!
I have cut it up and the tube is a bart of the constructions.
So I did not find any broken lines,parts in the sensor.
I think the problem is the gel as is in the bottom of the hole as keeping the presure to be korrekt to the sensor-wall.
PLEASE if some one can find what opening in the alu.block as going to the sensor, then we can maka a small tube/line and try to clean out the gel and see if it works.
AND do we have some clever guy as can look at the wireing to abs unit, then we can connect it to OBD and try to find a way to fix this.
Connect to obd or diag is easy. I try post maybe tomorrow.
Any one have fixed staking pump motor problem, then have errors about pump motors plug or pump motor.?
Lagas: it is fault in transistor, see my work in the Rover abs unit in this thread.
It take 1 hour to fix!
Christian Johansson via Iphone 5s
Have bmw one. Transistor big one not helping, thing it is maybe ATE driver, but funny think if ju hamer abs unit or motor it spins for 2-3 activations and then error. Try put other motor with compleat al hydraulic same but spare unit work with both motors.
Ps.have many of this problem
Last edited by lagas; 9th November, 2014 at 03:37 PM.
Is it bmw bosch "...001"?
This have always bad connections/broken alu.wire.
I did 2 last week.
Christian Johansson via Iphone 5s
keesg60 (19th July, 2017)
No no, this ones is ATE i uplaud late on photos
Please upload photo on ate unit.
Christian Johansson via Iphone 5s
there is the unit.
usually you get fault's:
005D F1 : DSC Hydraulic unit: pump motor
00A8 AF : DSC Hydraulic unit: pump motor connector faulty
How big ultrasonic machin did you use?
Christian Johansson via Iphone 5s
I have order a new 400w with heating to test this.
Did you put a lock over sensor before cleaning?
Christian Johansson via Iphone 5s
If it's no cleaning solutions... Where is the sensor problem?
Pipina: what is the ohm on new unit?
Christian Johansson via Iphone 5s
Bookmarks