Ireland fix new dvb upload v.1.6b

**alfagt** · 29th June, 2009, 01:22 PM

Can anyone help, have dm 500c running dk1.0, looking for info to upload the new nagra 2 fix for ireland , new dvb v.1.6b. Have and used flash fxp before but i just can't seem to get my head around this for some reason, can someone please post a guide for us not so clever people, still a bit green to all this,

I Have to say this is a great forum , well done to all involved,

**Darth Maul** · 29th June, 2009, 01:42 PM

download the fix and save contents to desktop

-if the dreambox is not connected to your network un plug it and bring it over to your router and plug it in there ( before you do that check you communication settings and set them for your network rembering your IP address) connect the router to your dreambox with a lan cable.
-open up a ftp program such as Filezilla (enter the ip address of dreambox and username and password usualy "root" "dreambox" and copy the 3 files to var/bin on the deasktop
- right click on the 3 files and change there file attributes to 755.
- plug the box back in and connect it up to TV
- press the blue button and then 3 Tuxbox commander
- go to the var folder and press OK then under that bin and ok
- select the hypercam_1.06 file hit ok and ok to execute.
- exit back out and go to skysports and wait 1 minute the change channel and it should clear.

**Duggy08** · 29th June, 2009, 01:50 PM

Thanks Darthmaul. Been looking for clear directions on this. Will give it a try later.

**alfagt** · 29th June, 2009, 02:27 PM

Thanks M8 for the quick reply, i will try it out later, great stuff,

nice one,
regards alfagt

**Saruman0** · 29th June, 2009, 02:44 PM

Doesn't the key file need to be 777? i.e. if updated keys are written here it needs the +Write permission?

Anyone clear the standard channels, BBC, SkyOne etc?

Upgraded to PLI3 and applied the fix. It's reasonably stable bar the long delay to startup on reboot.

**satman** · 29th June, 2009, 03:00 PM

no keys are written,, there already inside hypercam.keys
its only running on keys no AU inside,

if your bbc aint clearing remove your n1 keys inside SoftCam.Key