Something is wrong , wrong read.
Try to clean connectors of chips and read again - or post the number of ecu and i will try to find ori from database.
Hello, I have car with hot start problem. Its Seat Alhambra 1.9 TDI 1998 year. I have red two 27C010 chips (low and high).
I never tried to fix this problem and would like to receive some help I tried to open these files with Winols (low and high), but Winols just finds 10 maps. I tried to find the hot start map in 2d view (I got picture how it looks in EDC16, it shouldn't differ much?) but no luck. Sorry for bad English.
Could any1 look at my files and help me out?
I attach my dumps: Low.zip High.zip
Something is wrong , wrong read.
Try to clean connectors of chips and read again - or post the number of ecu and i will try to find ori from database.
doesnt seem right here also
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
thanks for your anwsers guys!, I will try tomorrow, the ecu and the car is in the garage. Ahhh =/
Good morning, I have red again the eeproms. Could anyone check that these are correct and help me out?
I attach the dumps:low n high.zip
make a picture of the ecu label... you dumps still doesn't look ok.
Thanks for your anwser, there is a picture of ecu label: 10656485_959302584087239_1997137122_n.jpg
I found an original file on Russian website, all ecu label information match: 0281001735.zip
Here dumps from 028906021GT 1906 0 281 001 735 with hotstart mod.
I guess you already have installed plcc32 sockets... and you are programming 29F010B chips.
br
Milicija (28th August, 2014)
Thank you very much!, I will let you know how things went I'm doing this "stuff" for the first time so im kinda newby.
Thanks again morfej for your help , car starts fine now when high temperature. Graph made when engine temperature was 80-90 Celsius: Hot start show.jpg
morfej (28th August, 2014)
Bookmarks