BMW e92 AIRBAGS problem

**dalisman** · 12th September, 2014, 05:16 PM

Hello all

I need advice. I have car after crash . i replace all damaged airbags for new one and reset crash data from module from eeprom.
but when i connect module i have all errors back like car is still with crash parts. any one have idea what can be wrong ?
It is bmw e90 2011 year .
I have foult about
-passanger airbag stage 1
-driver stage one and 2
-belt tensioners pass and driver
-x/y direction sensor
-side airbags driver and passanger.

**PierreTheron** · 12th September, 2014, 11:36 PM

Must put on bmw diagnostics tool and reset crash i think m8 .

But i am allergic to this toool now ..

**dalisman** · 13th September, 2014, 10:21 AM

0285010071 6577-9184433-02.zip

can someone reset this crash data for me ?

0285010071
6577-9184433-02

**repairmymodule** · 13th September, 2014, 05:34 PM

Are your CPA clips OK (the plastic insert on the airbag plugs that you push down after connecting plug to airbag). Make sure they aren't damaged and still disengage the shorting bar.
With original file, should erase crash code (telegram) with scan tool.

Good luck.

**kolocar** · 14th September, 2014, 01:37 AM

That's ok,but NO thanks=NO password!(Some people always ask for help, but never return results and NO thanks), if there is no reply will be included in the blacklist!!!