VW T5 disable tachograph

**yokazik** · 16th March, 2017, 11:19 PM

Every thing what U need is in this thread. Adaptation in chanel 33 . and connect cable in white and yellow plug from tacho.

**Tecam** · 6th July, 2017, 11:15 AM

Originally Posted by vagdiag

Adaption 33-0, Disconnect tachograph. Plug yellow/ black wire B1-100ohm resistor 12v, B2 red wire ground, B3 brown wire speed signal to B8 white/blue wire. Thats it.

When you say plug yellow/black wire B1 100ohm resistor, do you mean the resistor goes between the yellow & black wires please?

thanks T

**Tecam** · 7th July, 2017, 08:24 AM

Hi all, I have removed the tachograph from my 2006 VW T5. I set 33 & 0 in adaptation, & the mileage has reappeared on the speedo. I connected the brown wire (B3) to white/blue wire (B8), soldered a 100 ohm resistor between the yellow wire (B4) & the black wire (B1), & the red wire (B2) to ground as in vagdiag's description. The speedometer still doesn't work. The red wire, btw, reads 8 volts? & you say it should be earthed?
Any help appreciated please!

**condorneck** · 6th October, 2017, 03:36 AM

Can work on a dash vdo polo classic 93c46, I have problems with tachometer.

**vbrav87** · 8th May, 2018, 11:44 PM

This is just what I was looking for. I know it has been long ago, but I just got a T5 with that tacograph and I'm looking for a way to remove it, I am not going to use it at all.

**hipolitogt** · 15th May, 2018, 05:36 PM

Originally Posted by konq100

Problem solved. Thanks!

how did you solved?

**KG5** · 29th May, 2019, 01:31 PM

Hello, I would like to remove tacho since its not going to be used anymore.
After following instructions from this thread I got mileage info back on the cluster but speedometer does not work. Is it necessary to modify file in this case?
File attached.

**autepo** · 23rd September, 2019, 06:16 PM

Originally Posted by mcd76

are you telling us how you did it?

Please let me know your solution. I have the same problem here.
Thank's in advance

**rimljan** · 24th September, 2019, 01:03 PM

Post dump 93c86

**mcd76** · 24th September, 2019, 01:15 PM

Originally Posted by autepo

Please let me know your solution. I have the same problem here.
Thank's in advance

you have a mesage....

**cflaviu** · 15th October, 2019, 07:27 PM

Originally Posted by vbrav87

This is just what I was looking for. I know it has been long ago, but I just got a T5 with that tacograph and I'm looking for a way to remove it, I am not going to use it at all.

Hi there people,

I just joined this form as I see there is a lot of info here about T5 vans. I am in the same situation as some of you - wanting to uninstall the tacho from my T5. I did the adaption 33-0 and got rid of the "T" in the dash and also re-enabled odometer but speedo is still dead. Am curios what you guys post in the attached archives. Is it just the wire manipulating left to do to restore speedo?

Another question to those who did the adaption 33-0 and the wire job, did you encounter any side-effect on the instrument cluster or the car behaves just like one that never had a tacho?

Thanks and cheers!

**george1** · 24th April, 2020, 03:06 PM

Hi, I have a similar problem with a t5 from 2015 year, could someone help ? Thanks

**Fake2222** · 10th July, 2020, 01:19 PM

Hi mate, can you pls. do Tachogroph off vor my dump. Speed and Fuel dont work.

thanks mate

@Inquizit0r

**ghitab** · 10th July, 2020, 10:39 PM

Did you disable from adaptation? Post eep of dash

**tachoreparatur2** · 7th January, 2021, 09:04 AM

Originally Posted by ghitab

Did you disable from adaptation? Post eep of dash

Hi dear Group

I have VW T5 Year 2007 with Tachograph , in VCDS i change in Chanel 33 from 1 to 0
Now Trip shows in cluster but km/h not work

i have read the Cluster eep 93C86

Can anyone help please
THX Very much