Xprog 5.5.1 Atmega and eep free for all

**elremont** · 14th January, 2015, 10:20 PM

Originally Posted by binhminh410

Hi all friend
you must programmer step by step ,i used with USB-UPA:
1. Erase chip atmega 64
2. Program eeprom , Flash
3. Set Lock bits and fuse bits. Program lock bits, fuse bits.
4. Copy Xprogbox 5.51 to C:\ and run Xprognew.reg
5. Run XprogDesktop.exe and update .

Hi friend where is XprogDesktop.exe?
in folder XprogBox551 no this

**stas12** · 15th January, 2015, 09:30 PM

ha-ha antivirus disable...

**madbg** · 16th January, 2015, 10:52 PM

Hi
Can i do this with Pony prog?

**Zmann** · 17th January, 2015, 01:54 AM

Yes, here's Pony fuse and lock...

**austingreen** · 17th January, 2015, 02:30 AM

How do you solve it?

**austingreen** · 17th January, 2015, 02:31 AM

Originally Posted by binhminh410

problem solved. it work good

How did you solve it?

**austingreen** · 17th January, 2015, 03:27 AM

Originally Posted by gyapi11

I reapir my xprog in this way.
I use UPA-USB Device Programmer v1.2 to repair my xprog

1. Earse Chip (Atmega64)
2. Lock Bytes all True Before Programming and fuse bytes like in photo fuse.jpg
3. Write Flash
4. Write Eeprom
5. After write flash and eeprom configurate Lock Bytes see photo lockbytes.jpg
Merry Christmas

Good job. But Would you please upload "photo fuse.jpg" and "lockbytes.jpg"

**hcwc** · 17th January, 2015, 11:25 PM

Originally Posted by austingreen

Good job. But Would you please upload "photo fuse.jpg" and "lockbytes.jpg"

It's in 'atmega' folder

**manasrah** · 20th January, 2015, 02:06 PM

Thank you very much . But what about the airbag can u active it to read mac7xx? And photo in cas ??

**simaservis1108** · 21st January, 2015, 04:10 AM

Here is this firmware in action:
https://www.youtube.com/watch?v=qI7UVwmNI5w

This is a video I made for a repair of Xprog that someone bricked trying to do this update.
Just wanted to make a video to show to a friend it is working before sending it back,and posted it so members can see these dumps are working very well even with some bugs.

**art64** · 21st January, 2015, 12:34 PM

Hello ,DK friends,
My TL866 also made without ICSP. Is it possible to make myself In-Circuit cable for TL866 connecting via ZIF-40 port? My friend also disposing R270 programmer, but it seems not declares ATmega controllers. I saw the post about Ponyprog,but it sounds for me unbelievable. What is wiring diagram for Pony? How I can reflash ATmega in simplest way?