Hi, I just received clone Ktag, but it dont work. All cars in list grey... not active also not active PROTOCOL button. Tried 2.06 , 2,07 soft, all the same.
Does there problem if it was connected to internet for couple minnutes ???
Last edited by darius89; 17th December, 2014 at 07:23 PM.
Read flash inside unit and put here.
Non ut edam vivo, sed ut vivam edo.
You mean flash card data ?
Blocked, should never go online with these clones.
does possible to fix ?
This tool has been blocked online for sure. You can check if the NXP is locked, I'm sure it will be. I think you need to change the chip and re flash firmware.
Last edited by bondiblu; 17th December, 2014 at 11:27 PM.
Yes jlink+new NXP+firmware https://www.youtube.com/watch?v=lN8V2htDNi0
but first check the SD card
I had the same problem I solved
seeks on the DK forum SDcard file for Ktag
Regards
Last edited by imcumen; 17th December, 2014 at 11:50 PM.
pataroucci (3rd April, 2015)
prusony (18th December, 2014)
look here for sdcard file for ktag by Zohar
http://www.digital-kaos.co.uk/forums...n-here-454360/
Hello there, did you manage to solve the problem? Many thanks!!
Last edited by korrni; 19th December, 2014 at 08:57 AM.
Hello there, I've had the same problem, all options were greyed out and unselectable, but I've managed to write the NXP using J-Link and now it works , please let me know if you need it! Regards!
Rewrited data in card , but didnt help. Please KORRNI Need help with rewriting.
Do you have J-link? Tomorrow morning I'll post the flash file, I'm out of the office! Greetings!
Sent from my iPhone using Tapatalk
Hi, yes i have j-link but dont have any connecting instructions.
Thanks.
Bookmarks