AVDI or FVDI pcb components

**gopelhu** · 2nd April, 2019, 09:15 PM

Hi all,

I would ask everyone who has a fvdi that has softdog to try to read the lpc processor and send me the dump.

or.... pls upload this thread.... thank you very much

Regards, G

**gopelhu** · 2nd April, 2019, 09:19 PM

Originally Posted by user2468

Please dont try to reflash your FVDI if it is working OK!
Try to write this fvdi boot v1.0 hex file via uart, maybe help.
Pass for Boot+Prog hex file pres Thanks + Rep.

To prog. the LPC1788 use MagicFlash + FTDI USB to TTL Serial Adapter 3.3V

Connections Here:
https://www.digital-kaos.co.uk/forum...=1#post2530475

Hi,

Can you send me the pass for this this TEST_BOOT+Prog.rar?

Regards, G

**karalaitizzz** · 8th April, 2019, 02:24 PM

hi to all, i have fvdi 2018 from stic, but now its stop working and not recognized by any pc, i open unit and found that when i conect it to pc red smoll light are blinking, maybe any one knows any solution? many thanks

**zoki21** · 8th April, 2019, 07:56 PM

which uses the operating system, 32 bit or 64 bit

**zoki21** · 8th April, 2019, 08:00 PM

reinstal driver,meybe help

**user2468** · 8th April, 2019, 11:03 PM

clear your private message space because it is full!

**zoki21** · 9th April, 2019, 07:21 PM

Can you send me the pass for this this TEST_BOOT+Prog.rar?

Regards, G

**gopelhu** · 13th April, 2019, 10:08 PM

Hi all,

firstly: user2468your files is the ELMACHT (Thomas) F08469 fvdi's file.

secondly: All members that them use the fvdi : db.bin file crypted with the lpc1788 processor chipid !!! Pls understand it/them !!!!!!!!!!!!!!

If anybody use this F08469 file, then always get this error: interface not calibrated.

Regards, G

**gopelhu** · 13th April, 2019, 10:20 PM

Again....

I have some boot files : 001 100 101 but still i working on this f*cking boot 202 file

Regards, G

**pifulete** · 24th April, 2019, 12:02 PM

Hi, can anyone share gut fw generator to generate fw and db file for fvdi?

**sm0k3r** · 29th April, 2019, 02:51 PM

cannot be readed.
i have avdi_boot.hex usb repair was pcb v4 bootloader version 201
Looking for v3.pcb avdi_boot.hex with soft dog

Originally Posted by gopelhu

Hi all,

I would ask everyone who has a fvdi that has softdog to try to read the lpc processor and send me the dump.

or.... pls upload this thread.... thank you very much

Regards, G

**sm0k3r** · 29th April, 2019, 02:56 PM

pass please

Originally Posted by user2468

Please dont try to reflash your FVDI if it is working OK!
Try to write this fvdi boot v1.0 hex file via uart, maybe help.
Pass for Boot+Prog hex file pres Thanks + Rep.

To prog. the LPC1788 use MagicFlash + FTDI USB to TTL Serial Adapter 3.3V

Connections Here:
https://www.digital-kaos.co.uk/forum...=1#post2530475