try the is Check sum.rar
hi
someone can verify checksum and file please on this dcm 3.7? (kia pro ceeds 90hp)
error after read from kess: checksum error
Guy say me car is not tuned..
HW: U700B120_DELIV_1
SW: 7G65_UBAA02_D2 U
N?.VIN:
Ver.SW: UBM02EI5UC
Ver.HW: U7G65
SW m?j.: 65UB502MCWEHIA02
if someone have original ..
many thanks !!
Last edited by moky; 30th January, 2015 at 08:20 PM.
try the is Check sum.rar
moky (30th January, 2015)
thanks but checksum is from 2014 !
what tools use to read this file ?
moky (30th January, 2015)
Kess was use but checksum error in end of reading..
so, if you have checksum error in end of reading... this means that software on ecu is already modified.
I had the same problem in Opel Insygnia 2.8 T OPC... and there was mod.
Last edited by chiptuningmaha; 30th January, 2015 at 07:41 PM.
moky (30th January, 2015)
car have 2000km and sure no mod ...perhaps too much recent car..
Last edited by moky; 30th January, 2015 at 07:51 PM.
give all numbers from ecu
moky (30th January, 2015)
HW: U700B120_DELIV_1
SW: 7G65_UBAA02_D2 U
N?.VIN:
Ver.SW: UBM02EI5UC
Ver.HW: U7G65
SW m?j.: 65UB502MCWEHIA02
it is 100 % oryginal. I compare with oryginals from Kia Rio 1.4 CRDI 90HP. But my file have 2mb (read by CMD) Your file have 2.125 - read by Kess. All maps is the same.
ECM Titanium find in your file driver. So all is ok.
moky (30th January, 2015)
ok thanks a lot so hardware problem..
please send me your original file
thx!
kia_rio_dcm37.zip
pass PM
moky (30th January, 2015)
many thanks !
hello
I have hyundai i20,readed by kess and it give checksum error after read
need dpf off if my file is ok,I m ready for pay.thanks
HW: U700B120_DELIV_1
SW: 7G65_PBAA02_D2 P
VIN nr.:
SW ver.: PBMH0EI5UC
Spare:
Engine:
HW Ver.: U7G65
SW upg.: 65PB502MCWEHIA01
Installation:
Bookmarks