lylezim (14th March, 2017)
lylezim (14th March, 2017)
you guys are busy working on a copy tool and rather not focusing on your own tools,
have you notice what your customers want from you not any new tool but need good support from you guys manufacturing new or copy tool without good support you have no stay in the market .
you guys should focus on your own tool now tango is far ahead of tm100
fvdi,fvdi2 and fly obd terminator cannot match avdi original
XHORSE focus on there own tool with very good support and they are making it in the market
you said fvdi2 and fvdi obd terminator have no bugs and yet you guys go ahead cracking VVDI2
FLY SHOULD WAKE UP.....
jnand (14th March, 2017), obdsystems (17th March, 2017), rola1971 (14th March, 2017), Siham (14th March, 2017)
This is why company like vvdi doing so well
and fly company fail
vvdi listen to customers
fly company does not
this why they fail
and won't last
obdsystems (17th March, 2017), siyadk (15th March, 2017)
Specific Function: VAG BCM2 ALL KEYS LOST FOR AUDI A6/A7/A8/TOUAREG from 2009 to 2013-6 is free for all fvdi 2 full and fvdi 2 vag customers.
How to add totoo to mute list?
Sent from my EVA-L19 using Tapatalk
I have read this link without rest.
I find this programmer interesting.
I would like to know that this is for the cars;
chery
great wall
brillance
jac
ssangyong
lifan
ha/ma
geely
faw
zotye
carri
foton
byd
chana
emgrand
other . Market in my country is many. This subject is handled a lot
Can remove pin codes from immo box and ecu box?
WHAT OPERATING SYSTEM WORKS FOR?
WIN VISTA / XP / 7/8/10 32/64 BITS?
Last edited by juancho18; 15th March, 2017 at 04:39 PM.
Hi juancho18
I have been able to try with chery and greatwall
The immobox -2010 (7935) works fine.
It works well the greatwall delphi bringing the wingle 5 (48)
The immobox 2010- (7936) takes out the pin code, but you need a programmer to finish the job, example: greatwall M4, bring an immobox 24c02, open memory reading with chery A3 module (7936), you will get The position of the keys and even allows you to program, but the car will not start, because what the module does in this case is pre - encode the chip, so you must finish the job with skp, x100, etc.
ByD the smartkey I could not program it, I do not know where to get a code of 16 digits
MG3, the bcm that I have touched, are not compatible with TM100, but you can remove the pincode and program with x300 and eeprom adapter
Haima2, I want to do the same process as with Greatwall m4, but I have not had to work again with this car
I have studied a lot of Chinese vehicles, but interestingly now that I feel ready to work with new brands or experiment, I have not been new brands in recent months, and that in Chile (where I live) there are 23 Chinese brands in the automotive market.
That has been my experience with Chinese vehicles, if you like we can feed back and share experiences.
I forgot, Tm100 runs well on windows 10 and 8 which is what I have been able to test
Greetings from Chile
Excuse translator english
Last edited by elmelor; 16th March, 2017 at 01:30 PM.
automotrizVIP (17th March, 2017)
Hello Totoooo !!!
How to solve problem of device IO Error on TM100? I have sent it back before and paid $100 and then it worked for few months and now dead again. It is much better to buy Original Tango or VVDI Basic because they atleast give support and fix bugs. I have now VVDI2 original and very happy with it.
TM100 should stop the 30 day server connect and also fix bugs when customer report it. I had reported many bugs and still they are there.
The ID46 copy thing is so hopeless as it hardly succeeds with anything.
FIX UP TM100 before making more tools. Many people will buy TM100 if they fix the bugs and make it more reliable.
Dont be fooled by this statement guys. He is just trying to divert everyone's attention onto his new supposedly super duper tool vvdi, fvdi, or whatever he calls it. Whenever I tried to compare TM100 to Tango, Premier would quickly point out that this is a TM100 forum, not Tango, but this Totoo guy seems to have a free hand. I want you to act on this Premier. Tell Totoo to address his other clones in the appropriate forum, and please remind him that this is TM100 forum.
I done key BMW F11 whith cas4 whit Tm100, all ok, key work good.
But now tm100 no show to me number off key.... I need to do other to same car but I don?t know what number, I need read again cas4??
Thanks
lylezim (24th March, 2017)
Gwee, I am thinking of buying the TM100 now. This thread is old, I wonder what you think of TM100 now. I am a newbie to eeprom programming, and I find TANGO and TMPRO very expensive. Did TM100 improved from the date of this thread?
nenadgorgi (27th March, 2017)
Hi thekeyzone
The tm100 is according to my experience, a good machine to start with this type of work, for others it is rubbish, but I think what determines its usefulness is the automotive market that you have. For this reason, I recommend that you check the thread completely, write down the vehicles you work and do not work, and see if it is profitable in your country and city (your market).
If you work most of the common vehicles in your city, then for you will be a good tool. Now if he does not work the common vehicles of his city and buy it, it burns in frustration for having spent money on something useless.
I clarify that it is not the best machine, but depending on the automotive market and its ability, it can be profitable.
Greetings from Chile.
Excuse the bad English.
just4upal (28th March, 2017)
Bookmarks