I need help with this Jeep wrangler

**electrones** · 2nd February, 2015, 02:39 PM

Hi friends

I have tihs jeep Wrangler with some alterations in the suspension, wheeled with diameters greater and height of the amended in suspension.When walking with car on asphalt a wonder, but to walk by rocky paths the car starts to stumble and enters safe mode does not exceed 60km / h.
I found 2 Faults the diagnosis codes in ESP
521C torque request signal denied
523C dybamics sensor mounting / installation performance
My questions is:
Someone can say something about this code:
523C: dynamics sensor mounting / installation performance- where is the location of dynamics sensor ??

Thanks in advance

Cheers

**Meat-Head** · 2nd February, 2015, 08:46 PM

Err dumb question, can you put orginal tires and rims on fir a rest.

had a Peugeot 807, turned out had odd sized tires on the back, so let air out and fixed.

is air filter good?

**alessioblaupunkt** · 8th February, 2015, 11:14 PM

Are you pulling a 747? Car entered safe mode after some meters.

Agree use OEM wheels and tyres or RPM signal from ABS sensor could be incorrect so car run in safe mode.
Did the car run in safe mode immediately after using non OEM tyres?

Agree air filter/ air mass sensor/ vaccum line on turbo (is it turbo?)
Petrol or gasoline? Need to determine if it has foo-foo valve.

**electrones** · 9th February, 2015, 09:13 PM

Originally Posted by Meat-Head

Err dumb question, can you put orginal tires and rims on fir a rest.

had a Peugeot 807, turned out had odd sized tires on the back, so let air out and fixed.

is air filter good?

Originally Posted by alessioblaupunkt

Are you pulling a 747? Car entered safe mode after some meters.

Agree use OEM wheels and tyres or RPM signal from ABS sensor could be incorrect so car run in safe mode.
Did the car run in safe mode immediately after using non OEM tyres?

Agree air filter/ air mass sensor/ vaccum line on turbo (is it turbo?)
Petrol or gasoline? Need to determine if it has foo-foo valve.

I really enjoyed the delicacy of you my friends, the next i will order a full clarification of ESP function.
You are so dear.
Grateful

**Meat-Head** · 10th February, 2015, 12:08 AM

Originally Posted by electrones

the next i will order a full clarification of ESP function.

Extra Sensory Preseption, if you want to over take round a blind bend, push the button, tells you if oncoming traffic

**teuton** · 10th February, 2015, 09:41 AM

To give ya some info about this specific code it will be necessary to provide specific vehicle data like YMM, type of ABS/ESP etc. Otherwise you'll get more enjoyable posts.....

**electrones** · 9th April, 2015, 10:11 AM

Originally Posted by teuton

To give ya some info about this specific code it will be necessary to provide specific vehicle data like YMM, type of ABS/ESP etc. Otherwise you'll get more enjoyable posts.....

Dears friends

I do house work as due and here is the information;
Wrangler rubicon petrol v6, 3,6l, year 2014.
The car has bought changed in Jeep dealer respecting all the rules, i think!!!!
Was elevated 4 inchies all used set of source of Jeep
I have some pictures annex

I need help to solve this probs, thanks in advance
--- electronic control unit identification ---

Chrysler No. : 04779788AF
ECU Origin : DCX
Supplier : Teves
Hardware Version : 07 / 01
Software Version : 07 / 00

Fault Codes
============================================
521C Torque Request Signal Denied
523C Dynamics Sensor Mounting/Installation Performance

Cheers

**electrones** · 9th April, 2015, 07:45 PM

Any 1 can tell where is the location of the Dynamics Sensor on this car please!!!
What is your function(Dynamics Sensor), someone can explain me please!!!

Help please!!!

**Meat-Head** · 9th April, 2015, 08:39 PM

No idea but might be worth looking for damage in center tunnel under front seats.

ring parts with vin ask price availity and location

**Tuiken** · 9th April, 2015, 09:33 PM

Maybe help ImageUploadedByTapatalk1428611626.154915.jpg

**Tuiken** · 9th April, 2015, 09:45 PM

I think you must disable ESP in that conditions

**clusters** · 9th April, 2015, 09:52 PM

You can try searching instead for c123c code, easier to find info. Tuiken posted pic of correct sensor location.

**Tuiken** · 9th April, 2015, 09:55 PM

Read this
http://www.wranglerforum.com/f274/di...1/topics/79003

**clusters** · 9th April, 2015, 10:04 PM

Good find, I bet that info to disable ESP is in the owners manual.

**electrones** · 19th May, 2015, 10:03 PM

Thanks friend for help
But owner decide to put new Dynamics Senso but after mounting the sensor the car continued to enter safe mode, did the diagnosis found these DTCs:
ECU
0390 Camshaft Position Sensor Circuit - Bank 2 Sensor 2
0365 Camshaft Position Sensor Circuit - Bank 1 Sensor 2
ESP- ABS
521C Torque Request Signal Denied

523C Dynamics Sensor Mounting/Installation Performance- It is fixed to the assembly of new sensor

So, my question is does (Torque Request Signal Denied) comes with influence of malfunction of the camshaft sensors or something more, disturbing car.! ??

Thanks in advance