Key Codes location

[rapidlocksmiths]

if the wafers are all felt when no tension , then has to be either issue with tool or the keyway and plug are badly worn and the tool is turning under tension and comming out of position , if case then try inserting tool then a shim to hold pick square in correct position when tensioning.

[misterwasp77]

Removed the door lock already. Ive never stripped a lock down before to remove wafers. Is it able to be reassmebledor do i have to order a new lock housing as im guessing the pins have to be drilled out.

[rapidlocksmiths]

i have already told you how to pick the ignition , so you can decode it or remove it , a member here also posted this video showing exactly how to do this amazing what can be found when you search the forum https://www.youtube.com/watch?v=S5eY...gqgz0uanT0yzhg

[key mechanic]

IMG_20210830_012836.jpgmazda 3 2008,code. driver's door, on the larva. the lock can not be removed.

[JHDSoft]

hi all

i need help vw Caddy 2016 all key lost

Is there someone who can show me where to find the key cut code.

i don't have lishi

thank you in advanced

[rapidlocksmiths]

no key cut codes stamped anywhere on vag group , so you really do need that lishi tool if you want to get the key cuts.

[JHDSoft]

no key cut codes stamped anywhere on vag group , so you really do need that lishi tool if you want to get the key cuts.

Even in the eeprom immo or ecu ?

[rapidlocksmiths]

not even in the eeprom , immo and ecu , you will need lishi or a very friendly dealer to provide key cut code

[fred77]

Even in the eeprom immo or ecu ?

Call an auto-locksmith

[rapidlocksmiths]

Call an auto-locksmith

now that is sound advice

[skilion290]

Hi can folks can anyone help me generate the last two digits for this 2012 nissan versa 3 1 2 1 2 4 4 2 _ _. Thanks

Sent from my SM-A125F using Tapatalk

[skilion290]

Sry this re from driver door lock.

Sent from my SM-A125F using Tapatalk

[rapidlocksmiths]

Ok , if these are the cuts from the drivers door lock then they are positions 3 to 10 and not 1 to 8 , so you need the 1st 2 cuts and not the last 2 cuts .

if the cuts in positions 3 to 10 are ??31212442 then its narrows down to 1 of 3 keys and will be either

1231212442
2331212442
3231212442

so cut with 12 in first 2 positions , if no joy then cut same blade 23 in first 2 positions , if no joy then use new blade and cut 3231212442

[skilion290]

First ten bitting worked perfect,and I got to learn something new.thanks very much.

Sent from my SM-A125F using Tapatalk

[rapidlocksmiths]

no problem , glad it worked out