Try write back original dump and then see what happen.
In alfa better and safely read, write by BDM
Hello .I have a Alfa Gt 1.9 jtd 150 cp from 2004 and i can try remap this car but i have a big problem.After remap with Galletto4 ,kess v2 ,Mpps the car is running ok at iddle but if i push the acceleration is going to hell.The engine stopped and say "VDC sistem error ,engine error. Checksum is ok ,tuning map is made with winols and ecm ,i try read/write with all interface but is the same.Any ideea? Thanks
Try write back original dump and then see what happen.
In alfa better and safely read, write by BDM
With original is ok ,the cars is in good condition but i need more power.This car is work on OBD ok i think in no need BDm mode
if in the original is fine, the problem will be your mod.
publish the files if you want some forero Dk check your mod.
The best way of being grateful is touching the button thank
mandaxcdd (1st March, 2015)
Here is the orig file and mod file
Last edited by mandaxcdd; 1st March, 2015 at 02:58 PM.
better not working rail pressure and limiters rail if you don"t know how...
Ok ,now i have a modi file on this car with a little smoke at start but i think is a way for much power .
I don't touch rail pressure and limiters just torque ,turbo pressure,limit pressure and a little injection
Bookmarks