COBRA1423 IMAGE VER:00.5 IS RELEASED NEW NEW NEW!!!!!

**cobra1423** · 20th March, 2015, 12:31 PM

HI EVERYONE OK NEW IMAGE V.005 IS OUT REMEMBER AND READ THE GUIDE SO HERE WE GO ITS IN THE DOWNLOADS AREA ENJOY
COBRA1423 IMAGE DOWNLOAD HERE--------> ................................................

ps. I have tried it on sim2.0.1 BUT NOT sim2.10 please let me know if it installs ok.

**miau18** · 22nd March, 2015, 01:44 AM

it works!!but takes lots of time booting when we restart the enigma!!!

**cobra1423** · 22nd March, 2015, 03:28 PM

Originally Posted by miau18

it works!!but takes lots of time booting when we restart the enigma!!!

Hi it's set to check the epg that's why it takes a bit longer you can switch it off by going into crossepg configure settinngs and select force epg reload on boot and set it to no. That will make it boot faster hope that helps you out.
Cheers cobra1423

**miau18** · 24th March, 2015, 12:10 PM

hi cobra its possible to get zap mode in black screen?when change channel it keeps picture in last channel?thanks

**dannyboy** · 26th March, 2015, 11:52 AM

Mate I flashed my dreambox with it but I had to flssh it back as it wouldent boot and kept loading the bootloader then stop then flash again
My box always was a lazy starter
Ive got another dreambox 800 with a ferrari sim is it just a matter of taken the sim card out and changing it and then flash it again
I think my board is on its way out
Thanks in advance daniel

**cobra1423** · 27th March, 2015, 01:24 AM

Originally Posted by dannyboy

Mate I flashed my dreambox with it but I had to flssh it back as it wouldent boot and kept loading the bootloader then stop then flash again
My box always was a lazy starter
Ive got another dreambox 800 with a ferrari sim is it just a matter of taken the sim card out and changing it and then flash it again
I think my board is on its way out
Thanks in advance daniel

hi it's for sim2.0.1 &2.10 yes you can change your sim
Cobra1423

**dannyboy** · 27th March, 2015, 02:47 PM

Is it simple to do and does it usualy take ages for the image to boot up ? Cheers daniel

**MW35** · 27th March, 2015, 05:10 PM

where can i find the image? thanks

**cobra1423** · 29th March, 2015, 10:40 PM

[QUOTE=MW35;2500036]where can i find the image? thanks[
COBRA1423 IMAGE DOWNLOAD HERE------> http://1drv.ms/1vtnxus

**digicon** · 30th March, 2015, 12:46 PM

The Image can be Downloaded from here:

Code:

https://onedrive.live.com/?cid=48e1ab905262688d&id=48E1AB905262688D%21109

Please do not post links to other forums with a similar content, it takes a minute or two to actually upload to a file sharing site that everyone can use

Thank you

**tidsfm** · 2nd April, 2015, 08:51 PM

I can not get this image to install.
I'm using sim 2.0.1 and tried to install via browser
I have the correct bootloader
It just hangs with the earth picture and flashing red light on dreambox.
Waited about 20 mins and still the same
If i try version 00.4b it works perfect.
Am i missing something or any tips to try, Is it worth trying usb install

**andiewill** · 2nd April, 2015, 09:59 PM

Originally Posted by tidsfm

I can not get this image to install.
I'm using sim 2.0.1 and tried to install via browser
I have the correct bootloader
It just hangs with the earth picture and flashing red light on dreambox.
Waited about 20 mins and still the same
If i try version 00.4b it works perfect.
Am i missing something or any tips to try, Is it worth trying usb install

Yep i would try the usb install, it works good for me.......

**johnabhoy0407** · 4th May, 2015, 10:35 AM

Originally Posted by andiewill

Yep i would try the usb install, it works good for me.......

Is it not the case - you've got to browser flash first then do the usb install? please correct me...

**andiewill** · 4th May, 2015, 10:49 AM

Originally Posted by johnabhoy0407

Is it not the case - you've got to browser flash first then do the usb install? please correct me...

Yes that is correct and when you do the usb install do the first part first then repaet the same sequence for the second part for the usb install, i made the mistake of doing the two parts at the same time where it just hangs on when completing the install ......

**Krusty** · 4th May, 2015, 05:54 PM

Originally Posted by johnabhoy0407

Is it not the case - you've got to browser flash first then do the usb install? please correct me...

Thank you for the reply but my question is about an internal HDD, as I said earlier the drive was working 100% on the previous version, all I have done is flash via the browser with the latest version and now the HDD will not initialize, it throws an Error with something about the sectors not being 512. I then flashed it back to the earlier version and its the same Error. I have since removed the drive and formatted it to FAT32 and also tried EXT3 but still the same Error. I really would appreciate anyone who has solved this as I just keep going in circles.